VFRworld - View Single Post

FrankoQ · 05-25-2008, 04:30 AM

I found information about this topic all over the place.
I wish there was one thread with all the info. So, here is my
experience in this install.

Blue Sea Fuse box 5025
cost: $39.99
30 amp relay $6.00

The box is a little big but it fits under the seat.
Velcro pad base in the pic.
sDSC01777.JPG

12 gauge wire used to do wiring from battery to relay and relay to fuse box.
Tap into the rear lights for the switched power line to the relay.

This is the wiring diagram.
Fusebox_install.jpg

Wires added to fuse box...
red circle on the right indicates the wire I tapped into for the switched power line to the relay.
sDSC01778.JPG

battery connections done...
sDSC01780.JPG

Relay installed (see red circle) and wired per diagram above.
sDSC01783.JPG

All done.
sDSC01784.JPG

05-25-2008, 04:30 AM	#1 (permalink)
FrankoQ Senior Member Join Date: Mar 2008 Last Online: Today 09:07 AM Location: Laurel, MD - Find Me! My Ride: 1996 VFR View my Photo Gallery Posts: 651 Thanks: 9 Thanked 11 Times in 10 Posts	Fuse box installation on 4gen I found information about this topic all over the place. I wish there was one thread with all the info. So, here is my experience in this install. Blue Sea Fuse box 5025 cost: $39.99 30 amp relay $6.00 The box is a little big but it fits under the seat. Velcro pad base in the pic. sDSC01777.JPG 12 gauge wire used to do wiring from battery to relay and relay to fuse box. Tap into the rear lights for the switched power line to the relay. This is the wiring diagram. Fusebox_install.jpg Wires added to fuse box... red circle on the right indicates the wire I tapped into for the switched power line to the relay. sDSC01778.JPG battery connections done... sDSC01780.JPG Relay installed (see red circle) and wired per diagram above. sDSC01783.JPG All done. sDSC01784.JPG __________________ Deny everything!