|
well i just got them out of the bike. i held them over a catch pan and started up the pump. it looks like you guys where right about the fuel link tube between the carbs. it doens't leak very much but when you touch it with a screw driver or shake the carbs a little it turns into a gyser. so that would explain why it seemed like it was doing it only when the bike was running. i know what joint it is so i will be tearing them apart to take a look at that seal. but just from the looks of it i think that it might just be in a little crooked. it looks like it is angled down a little at that joint so it might not be seated all the way. the seals are hopefully good. the carbs were supposedly totally rebuilt about a year ago and my small amount of tinkering with them seems to confirm that.
from what i've heard and read its a big pain to get these back togather right when you seperate them. anything i need to watch out for or do to make it all easier?
thanks again for all your help guys.
|