VFRworld - View Single Post

squirrelman · 07-02-2009, 05:58 PM

Carb service specialist

With over 30 years experience working on carbs from exotic sports cars, SCCA race cars to bikes, and having owned many VFRs, Hawks, VTRs ( and lots of other bikes mostly from the 80s and 90s) over the past 24 years, i feel i'm well qualified to offer carb cleaning and rebuild service to members here.

My service includes careful inspection, ultrasonic cleaning of jets, replacement of any parts found unservicable, blow-out with high pressure filtered air, setting float levels, remove mixture screw seals, precision assembly, bench tests to verify operation, and visual synchronization. Jet kits can be installed also.

Much INexperienced carb cleaning needs to be done again....and again because it takes lots of experience to do the job right the first time, every time.

I aim for less than 2 week turnaround time.

My plan is to have a fully cleaned and ROAD-TESTED set of '94-'97 carbs available on an exchange basis for immediate shipment. Also '86/'87 700/750

Put them in a box and ship. ( I'm willing to help you over the phone to remove and replace.)

If interested, PM me on this site or@ squirrelmanxxjerry@yahoo.com

07-02-2009, 05:58 PM	#5 (permalink)
squirrelman Uber Guru Join Date: Jul 2006 Last Online: Yesterday 10:58 PM Location: barf-a-load, ny - Find Me! My Ride: '86 VFR 700Fs (3)/ '97 VFR 750F/ '88 NT 650 HAWK (3)/ '86 Yamaha Radian/ '66 Yamaha YL-1/ '88 VTR 250 (2)/ '73 CB 125 View my Photo Gallery Posts: 1,876 Thanks: 82 Thanked 145 Times in 132 Posts	Carb service specialist With over 30 years experience working on carbs from exotic sports cars, SCCA race cars to bikes, and having owned many VFRs, Hawks, VTRs ( and lots of other bikes mostly from the 80s and 90s) over the past 24 years, i feel i'm well qualified to offer carb cleaning and rebuild service to members here. My service includes careful inspection, ultrasonic cleaning of jets, replacement of any parts found unservicable, blow-out with high pressure filtered air, setting float levels, remove mixture screw seals, precision assembly, bench tests to verify operation, and visual synchronization. Jet kits can be installed also. Much INexperienced carb cleaning needs to be done again....and again because it takes lots of experience to do the job right the first time, every time. I aim for less than 2 week turnaround time. My plan is to have a fully cleaned and ROAD-TESTED set of '94-'97 carbs available on an exchange basis for immediate shipment. Also '86/'87 700/750 Put them in a box and ship. ( I'm willing to help you over the phone to remove and replace.) If interested, PM me on this site or@ squirrelmanxxjerry@yahoo.com __________________ " Goin' to Hell in a bucket, but at least I'm enjoyin' the ride....... " "It's no use, mate, the bottom's fallen out......."