VFRworld - View Single Post - PC3+(Local Honda Shop*2)=Owner Need to Kill Someone

Cyborg · 07-02-2009, 08:11 PM

During the VFR's 32k check I got the local shop to install a PC3, during which they were supposed to do a custom mapping. When I got her back the o2 eliminators were not installed. I plugged them in and started riding only to have the response rough, especially when hitting VTEC. I took the bike back, told them about the o2s, the roughness and I 2wanted them to redo the custom mapping. Today, I got the VFR back only to find the o2 eliminatos in a bag again. The FUCKING IDIOTS didn't redo the map, their solution was to plug the o2s back into the system! I have noticed VTEC is smoother now but wanna know, should I

A) leave things as is
B) reinstall the eliminators and map myself
C) burn the damned shop to the ground

07-02-2009, 08:11 PM	#1 (permalink)
Cyborg Senior Member Join Date: May 2006 Last Online: Today 02:22 AM View my Photo Gallery Posts: 333 Thanks: 2 Thanked 29 Times in 23 Posts	*PC3+(Local Honda Shop2)=Owner Need to Kill Someone During the VFR's 32k check I got the local shop to install a PC3, during which they were supposed to do a custom mapping. When I got her back the o2 eliminators were not installed. I plugged them in and started riding only to have the response rough, especially when hitting VTEC. I took the bike back, told them about the o2s, the roughness and I 2wanted them to redo the custom mapping. Today, I got the VFR back only to find the o2 eliminatos in a bag again. The FUCKING IDIOTS didn't redo the map, their solution was to plug the o2s back into the system! I have noticed VTEC is smoother now but wanna know, should I A) leave things as is B) reinstall the eliminators and map myself C) burn the damned shop to the ground __________________ Yes, I'm crazy but I'd have to be nuts to admit it... Proud Member - Sixth Gen Militia - 1st VTEC Battalion - 69th Element - OkC, Ok**