Hey guys,
A friend of mine has a cycle repair shop / junk yard and has two 86 or 87 700/750 available. One of the bikes was running when it was parked in his junkyard (covered), the other has a locked up engine.
The good bike has a great seat, gauges, no plastics (except for a good rear quarter and a cracked headlight cowl), all the electronics looks good, as well as wheels, brakes, etc. Tank on the one bike has a big dent in the top right.
The other bike (not running) would just be for parts only. No seat, no tank.
Both bikes have Yosh pipes. (I think 4 into 1)
It was fairly dark in the basement so I couldn't go over everything.
(I was hoping for a 8-spoke wheel hidden in there somewhere! No luck)
He will set prices for the parts if you let me know what you want. He's a good guy and will help out if you need stuff.
Let me know what you need. I hate to see them rotting away unused!
Gary
GeorgiaRider
2006 White 6th Gen
I would like pics of the yosh please.
HOOK'EM HORNS!!!
VFR 87 700f2 with
hand made tail section
"There are chords in the hearts of the most reckless
which cannot be touched without emotion. Even the
utterly lost, to whom life and death are equally jests,
there are matters of which no jest can be made."
I'm also interested in the pipes. Please send a pic my way. Also if you can tell what the condition the carbs are in it wouldn't hurt me to have a spare on hand.
looking for rr and fuel pump and tail piece and left inside fairing.
Are the pipes still available?
- Zach
I need a head for a 87 700, anything there I could use?
That the front head
Okay guys,
Robert has finally gotten around to dragging the 2 old bikes out of storage and is ready to start selling parts! I don't know what he'll ask for anything, but it's worth a phone call.
You can reach him at 770-528-0940. His name is Robert and the bike shop is J-n-R cycles.
Good luck with your parts.
Gary
GeorgiaRider
2006 White 6th Gen
I called that guy 2 months ago and asked for pics of the yosh pipes. All I got was the run around. I called him 3 times and reminded him to send me pics. NOTHING! He had an add posted on Craigs list for his business and I spotted one of the VFRs. So I called right away.I still have his number and a copy of the add.
I live in my own little world, but it's OK, they know me here.
are you looking for the left inner panel the one between the tank and upper? I've got a brand new one OEM Honda for an 87 700 F2. $30 shippedOriginally Posted by pokerplayer6989
I live in my own little world, but it's OK, they know me here.
Will that fit on an 86 VFR750?
yes of course. the bikes share the same bodywork. comes with rubber gasket, too.
I live in my own little world, but it's OK, they know me here.
PM sent rc24.
due to differences in gauges 86 and 87 are not interchangeable for this piece.
HOOK'EM HORNS!!!
VFR 87 700f2 with
hand made tail section
"There are chords in the hearts of the most reckless
which cannot be touched without emotion. Even the
utterly lost, to whom life and death are equally jests,
there are matters of which no jest can be made."
The differences are that much?
There is a slight difference, my bad. It will fit up no prob but the contour around the gauges is different. F vs. F2. Let me know if you still want it dukiedook.
I live in my own little world, but it's OK, they know me here.
yeah, the contour around the outside edge is slightly different as well but with a little creative hot knifing it could work.
HOOK'EM HORNS!!!
VFR 87 700f2 with
hand made tail section
"There are chords in the hearts of the most reckless
which cannot be touched without emotion. Even the
utterly lost, to whom life and death are equally jests,
there are matters of which no jest can be made."
I took the time to mount the F2 panel on my 86 750, no hot knifing needed. There's an 86 700 on e bay right now with F2 panels on it as well.
I live in my own little world, but it's OK, they know me here.
LinkBack URL
About LinkBacks
View Profile
View Forum Posts
Private Message
View Blog Entries
View Articles
Reply With Quote
Bookmarks