|
I used a small pry bar. I placed a rag on the block and CAREFULLY pried them up. If i remember right, I pried against the outer edge of the throttle body right at each corner. It took a pretty good amount of force. You could also use a small hammer (to pry with - not hit anything with - lol). I also used a blow dyer to heat the spacers up some. I know they seem like they are welded on but they will come off. Good Luck!
Squirrelman - yup, runs great now. No issues with temp, either cold or hot.
Action
__________________
2004 VFR: Heil Bars, BMC, 2 Bros, Fender Elim, Heated Grips, +2 rear sprocket, DID gold chain, PCIII, Delkevic Headers. Tires- Pilot Road 2CT's
The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser people so full of doubts. - Bertrand Russell
"Sorry Baby, I had to crash that Honda" - Pulp Fiction
Last edited by Action; 11-27-2007 at 08:21 AM.
|