footpegs

v4pwr · 04-16-2008, 08:35 PM

has anyone replaced their o.e. pegs with aftermarkets. i seen some from L.P.
and was tempted to try them to see how they look and feel over the originals. but i wasn't sure if the springs on the front footpegs would work with aftermarkets. how about the rears can they be swapped out also?

SLOVFR · 04-17-2008, 12:52 AM

I just got some off ebay, Ill let you know if the fit as soon as they show up... I didnt feel like paying $38.00 for one of Honda's but We will see.

Knife · 04-17-2008, 07:05 AM

I replaced the fronts on my 5th Gen with Buell pegs, which are about an inch lower than stock. Had to do a little grinding to get them to fit, but it was an easy swap out (took maybe a half hour). Cost about $30.00 for the pair from a local Harley dealer.

SLOVFR · 04-17-2008, 01:34 PM

5th Gen pegs are different then 4th Gen and dont work too good unless you have a zip tie......Thanks Reg!

SLOVFR · 04-19-2008, 09:42 PM

Just got the foot pegs from Ebay that said they fit the Gen4 but no go! So I guess Ill buy a factory one.

derstuka · 04-19-2008, 10:32 PM

I bought some knurled aluminum rounded ones off of fleabay....I couldn't find them as of now, but I like them...a lot lighter as well.

SLOVFR · 04-19-2008, 11:20 PM

Thats what I got but do not fit the 750 as stated- you need another set :)

olivino · 04-20-2008, 06:44 AM

I am looking for aftermarket footpegs also (not the entire rearsets) to replace OE. Cannot find anything on the net for my 2007 6th Gen. I did find some Werkes for 2005:
http://www.motorcycle-superstore.com...800-Parts.aspx
,Are these or pegs for any other Honda (such as CBR) likely to fit?

SLOVFR · 04-20-2008, 01:55 PM

The 05 and 07 should take the same pegs, you could check the online parts catalogs and see if they call for the same # or call your Honda dealer if you got a nice parts guy.

squirrelman · 04-21-2008, 12:09 AM

I found that CBR 600 F3 or F4 footpegs will work on a Gen 4 if you do some filing....springs work too.

reg71 · 04-22-2008, 08:28 AM

Quote:

Originally Posted by SLOVFR

5th Gen pegs are different then 4th Gen and dont work too good unless you have a zip tie......Thanks Reg!

that was actually a footpeg from a ninja that I gave you. I took it off Terri's EX250...

reg71 · 04-22-2008, 08:29 AM

Quote:

Originally Posted by SLOVFR

Thats what I got but do not fit the 750 as stated- you need another set :)

which ones did you get? I might get them as spares... someone wore off the hero tabs on mine pretty bad...

SLOVFR · 04-22-2008, 03:06 PM

They have replaceable ends and are silver and round..... need pics?

ChatBox (No new messages since your last visit)
Loading...
Message...
Ask your questions in the forums. The ChatBox is for small talk. Lamps to everyone!

04-16-2008, 08:35 PM	#1 (permalink)
v4pwr Senior Member Join Date: Aug 2007 Last Online: 11-12-2008 09:21 PM Location: cleveland, ohio - Find Me! My Ride: 1997 vfr750f View my Photo Gallery Posts: 166 Thanks: 0 Thanked 0 Times in 0 Posts	footpegs has anyone replaced their o.e. pegs with aftermarkets. i seen some from L.P. and was tempted to try them to see how they look and feel over the originals. but i wasn't sure if the springs on the front footpegs would work with aftermarkets. how about the rears can they be swapped out also?

04-19-2008, 10:32 PM	#6 (permalink)
derstuka CrAcKbRaInEd MoDeRaToR Join Date: Jan 2007 Last Online: Today 12:20 PM Location: San Diego, CA - Find Me! My Ride: 1998 Honda VFR800FI View my Photo Gallery Posts: 3,371 Thanks: 12 Thanked 100 Times in 67 Posts	I bought some knurled aluminum rounded ones off of fleabay....I couldn't find them as of now, but I like them...a lot lighter as well. __________________ ~Jason San Diego Riders click here >>>> San Diego County Area Riders (SCAR) --------------------------------------------------- 1998 VFR800 Two Brothers CarbonFiber Slip-on ZG Double Bubble Oxford Hot grips BMC Air filter Thurn Motorsports Aluminum Chainguard Knurled Aluminum Footpegs

04-20-2008, 06:44 AM	#8 (permalink)
olivino Member Join Date: Jun 2007 Last Online: 10-23-2008 05:22 AM Location: New York My Ride: 2007 VFR Posts: 88 Thanks: 0 Thanked 2 Times in 2 Posts	I am looking for aftermarket footpegs also (not the entire rearsets) to replace OE. Cannot find anything on the net for my 2007 6th Gen. I did find some Werkes for 2005: http://www.motorcycle-superstore.com...800-Parts.aspx ,Are these or pegs for any other Honda (such as CBR) likely to fit? __________________ 2007 Honda VFR 800 Interceptor Candy Red Helibars Corbin Seat Oggy knobbs Scorpion SS oval slipons

04-21-2008, 12:09 AM	#10 (permalink)
squirrelman Senior Member Join Date: Jul 2006 Last Online: Yesterday 09:33 AM Location: barf-a-load, ny - Find Me! My Ride: '86 VFR 700Fs (3), '97 VFR 750 '88 NT 650 HAWK (3) '86 Yamaha Radian '66 Yamaha YL-1 '88 VTR 250 (2) '76 CB 125 View my Photo Gallery Posts: 860 Thanks: 4 Thanked 18 Times in 18 Posts	I found that CBR 600 F3 or F4 footpegs will work on a Gen 4 if you do some filing....springs work too. __________________ "Machines are the tools of freedom." :Cyrus Eaton " Goin' to Hell in a bucket, but at least I'm enjoyin' the ride....... "

04-17-2008, 12:52 AM	#2 (permalink)
SLOVFR Uber Guru Join Date: Oct 2006 Last Online: Yesterday 08:33 PM Location: Pismo Beach Ca. - Find Me! My Ride: 97 vfr 750 View my Photo Gallery Posts: 1,167 Thanks: 16 Thanked 27 Times in 19 Posts	I just got some off ebay, Ill let you know if the fit as soon as they show up... I didnt feel like paying $38.00 for one of Honda's but We will see.

04-17-2008, 07:05 AM	#3 (permalink)
Knife Senior Member Join Date: Dec 2007 Last Online: Today 01:10 PM Location: Downingtown, PA 19335 - Find Me! My Ride: 1998 Honda VFR800 Posts: 162 Thanks: 2 Thanked 19 Times in 14 Posts	I replaced the fronts on my 5th Gen with Buell pegs, which are about an inch lower than stock. Had to do a little grinding to get them to fit, but it was an easy swap out (took maybe a half hour). Cost about $30.00 for the pair from a local Harley dealer.

04-17-2008, 01:34 PM	#4 (permalink)
SLOVFR Uber Guru Join Date: Oct 2006 Last Online: Yesterday 08:33 PM Location: Pismo Beach Ca. - Find Me! My Ride: 97 vfr 750 View my Photo Gallery Posts: 1,167 Thanks: 16 Thanked 27 Times in 19 Posts	5th Gen pegs are different then 4th Gen and dont work too good unless you have a zip tie......Thanks Reg!

04-19-2008, 09:42 PM	#5 (permalink)
SLOVFR Uber Guru Join Date: Oct 2006 Last Online: Yesterday 08:33 PM Location: Pismo Beach Ca. - Find Me! My Ride: 97 vfr 750 View my Photo Gallery Posts: 1,167 Thanks: 16 Thanked 27 Times in 19 Posts	Just got the foot pegs from Ebay that said they fit the Gen4 but no go! So I guess Ill buy a factory one.

04-19-2008, 11:20 PM	#7 (permalink)
SLOVFR Uber Guru Join Date: Oct 2006 Last Online: Yesterday 08:33 PM Location: Pismo Beach Ca. - Find Me! My Ride: 97 vfr 750 View my Photo Gallery Posts: 1,167 Thanks: 16 Thanked 27 Times in 19 Posts	Thats what I got but do not fit the 750 as stated- you need another set :)

04-20-2008, 01:55 PM	#9 (permalink)
SLOVFR Uber Guru Join Date: Oct 2006 Last Online: Yesterday 08:33 PM Location: Pismo Beach Ca. - Find Me! My Ride: 97 vfr 750 View my Photo Gallery Posts: 1,167 Thanks: 16 Thanked 27 Times in 19 Posts	The 05 and 07 should take the same pegs, you could check the online parts catalogs and see if they call for the same # or call your Honda dealer if you got a nice parts guy.

04-22-2008, 03:06 PM	#13 (permalink)
SLOVFR Uber Guru Join Date: Oct 2006 Last Online: Yesterday 08:33 PM Location: Pismo Beach Ca. - Find Me! My Ride: 97 vfr 750 View my Photo Gallery Posts: 1,167 Thanks: 16 Thanked 27 Times in 19 Posts	They have replaceable ends and are silver and round..... need pics?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lowered Buell XB footpegs	ckamin	General VFR Discussions	10	03-31-2008 07:36 AM
Can I install the 2 Bros system without the passenger footpegs?	whiteboyslo	Sixth Generation 2002-2009	2	03-13-2008 01:31 PM
Replacement Footpegs	masonv45	Modifications	4	02-07-2008 07:17 AM
Wanted: Rear Footpegs	jackhammer	Buying & Selling	0	09-10-2007 02:05 PM
Lowering footpegs	Guest	Mechanics Garage	4	08-10-2005 01:59 PM