VFRworld - Modifications http://vfrworld.com/forums Engine, suspension, body, exhaust, and other modifications en Fri, 20 Nov 2009 22:44:43 GMT vBulletin 60 http://vfrworld.com/forums/red2black/misc/rss.jpg VFRworld - Modifications http://vfrworld.com/forums The Straight Poop on Loweking Kits http://vfrworld.com/forums/modifications/27496-straight-poop-loweking-kits.html Fri, 20 Nov 2009 18:46:56 GMT I too need a lowering kit for my 6th Gen. What is holding me back is questions about how changing the ride height will affect the handeling dynamics.... I too need a lowering kit for my 6th Gen. What is holding me back is questions about how changing the ride height will affect the handeling dynamics.

IMHO the boys at Honda R&D are right up there with The Almighty as far as being creative geniuses. Therefore I'M loathe to perform elective surgey on Mr. Honda and mines motorcyle.

My $64 question - does lowering the bike affect sttering or stability in any way, at speed or otherwise? If so how?


THX,

MAC ]]> Modifications MiddleAgeCrazy http://vfrworld.com/forums/modifications/27496-straight-poop-loweking-kits.html 929 shock 6th gen??? w ABS http://vfrworld.com/forums/modifications/27473-929-shock-6th-gen-w-abs.html Thu, 19 Nov 2009 00:01:45 GMT I am finding lots of threads on using a 929 rear shock for upgrade on a 5th gen can this be done on a 6th gen, how about an abs model?? thanks Dan I am finding lots of threads on using a 929 rear shock for upgrade on a 5th gen can this be done on a 6th gen, how about an abs model??

thanks

Dan ]]> Modifications Wistrick http://vfrworld.com/forums/modifications/27473-929-shock-6th-gen-w-abs.html quiet clip-ons? http://vfrworld.com/forums/modifications/27471-quiet-clip-ons.html Wed, 18 Nov 2009 23:44:20 GMT Hi all-

I am looking at getting some exhaust work done on my '06 vfr. I am looking to get a little performance boost, drop some weight and look cool. I am actually looking to keep the bike as quiet as possible. The tech at the shop I go to said to just get clip-ons. He said full exhaust would be total overkill.

That being said, Can anyone recommend some good clip ons that are relatively quiet and will work with the factory side bags/rack? ]]> Modifications 1337Sauce http://vfrworld.com/forums/modifications/27471-quiet-clip-ons.html Aluminum oil filler plug? http://vfrworld.com/forums/modifications/27468-aluminum-oil-filler-plug.html Wed, 18 Nov 2009 14:46:22 GMT Do any members know where I can buy an aluminum oil filler plug for my VF1000R? Thanks. Do any members know where I can buy an aluminum oil filler plug for my VF1000R? Thanks. ]]> Modifications donald branscom http://vfrworld.com/forums/modifications/27468-aluminum-oil-filler-plug.html <![CDATA[I've committed the modders sin!]]> http://vfrworld.com/forums/modifications/27461-ive-committed-modders-sin.html Wed, 18 Nov 2009 06:27:13 GMT I've done 2 mods at the same time. I installed a K&N air filter and hacked up my air box cover! The bike runs Fantastic and the intake noise is about twice as loud as a snorkel less bike.:biggrin::biggrin::biggrin:

Try not to laugh to hard, as I could not find my rivet gun, and had to brake out the hot glue gun.:thumbsup:





]]> Modifications VFRBenny http://vfrworld.com/forums/modifications/27461-ive-committed-modders-sin.html Replacement Headlight Bulbs http://vfrworld.com/forums/modifications/27439-replacement-headlight-bulbs.html Tue, 17 Nov 2009 13:33:51 GMT Does anyone have information on Hella replacemet bulbs for a 5th gen? Would like brighter bulbs but not more current draw. Thanks. Does anyone have information on Hella replacemet bulbs for a 5th gen? Would like brighter bulbs but not more current draw. Thanks. ]]> Modifications stevens9757@bellsouth.net http://vfrworld.com/forums/modifications/27439-replacement-headlight-bulbs.html Your opinions on a HID kit please... http://vfrworld.com/forums/modifications/27418-your-opinions-hid-kit-please.html Mon, 16 Nov 2009 09:22:43 GMT Hi all. I am after opinions on this kit on ebay please. It seems a reasonable price and looks like a comprehensive kit. HID Xenon Headlight... Hi all. I am after opinions on this kit on ebay please. It seems a reasonable price and looks like a comprehensive kit.

HID Xenon Headlight Motorcycle Kit Bulbs H4-3 6000K New - eBay

Thanks ]]> Modifications winaje http://vfrworld.com/forums/modifications/27418-your-opinions-hid-kit-please.html <![CDATA[HID's probably the best mod yet]]> http://vfrworld.com/forums/modifications/27414-hids-probably-best-mod-yet.html Mon, 16 Nov 2009 05:54:36 GMT i've been toying with idea of putting these on for some time. i just couldn't justify spending $100+ and getting an unknown set off ebay.
one night i was perusing craigslist and saw an add for "any color, any size HID kit" for only $60. i figured for 60 bucks, why not. all i have to do is take a nice "scenic" ride to E. LA (during daylight hours naturally) and pick them up.
i was pleasantly surprised to find out they were being sold from an actual store and not some guy's garage. they're a no name brand but they do have slim ballasts which makes installing much simpler for a bike. which by the way requires no cutting into the factory wiring. just plug and play. i've had them on for a few weeks now and i gotta tell ya, night and day. the visibility at night is so greatly improved. i only replaced the low beams (H4's) since i rarely use the high beams and to be quite frankly, you won't really need them with the HID's on.
i plan to go back there some time this week to pick up a set and convert my girlfriend's car to HID's.

just an testimonial for anyone who's looking for mods to perform on their bikes or for those of you northerners who are forced to garage your bikes for the winter months and need a project to keep you sane. ]]> Modifications Dudealicious http://vfrworld.com/forums/modifications/27414-hids-probably-best-mod-yet.html 5th Gen headers on a 6th Gen http://vfrworld.com/forums/modifications/27408-5th-gen-headers-6th-gen.html Mon, 16 Nov 2009 01:55:49 GMT Things are finally moving forward and I am getting close to being able to do the exhaust on my 6th gen. I've already got my 5th gen catless/sensorless headers and will soon be ordering the rest of the pieces. Along with this will be new exhaust gaskets.

This brings up the question of which gaskets I should be using when I install the headers. My assumption is that the crush gaskets for where the headers meet the engine should be for the 6th gen, while the two gaskets for where the rear downpipes connect to the collector should be from the 5th gen. Is this correct or should I be ordering all of my gaskets for the 5th gen? Does it matter? ]]> Modifications Meatloaf http://vfrworld.com/forums/modifications/27408-5th-gen-headers-6th-gen.html Quadzilla gets a wheel http://vfrworld.com/forums/modifications/27405-quadzilla-gets-wheel.html Mon, 16 Nov 2009 00:50:14 GMT Quadzilla getting restless. I have a polished cover for the rear cylinder head also it is just not on yet. BTW I need a plastic cover for the fuse... Quadzilla getting restless.
I have a polished cover for the rear cylinder head also it is just not on yet.
BTW I need a plastic cover for the fuse panel. Does anyone have one?

]]> Modifications donald branscom http://vfrworld.com/forums/modifications/27405-quadzilla-gets-wheel.html 1986 Fairing upgrade http://vfrworld.com/forums/modifications/27374-1986-fairing-upgrade.html Sat, 14 Nov 2009 23:36:20 GMT Has one been able to swap the stock VFR 700 fairings with the fairings off a 2001 or newer cbr? I can't stand the look of the square headlight, does anyone have any suggestions to make it look more modern? ]]> Modifications conception715 http://vfrworld.com/forums/modifications/27374-1986-fairing-upgrade.html <![CDATA[Can't afford Race tech]]> http://vfrworld.com/forums/modifications/27342-cant-afford-race-tech.html Fri, 13 Nov 2009 00:40:14 GMT So I was really hoping to rebuild my forks with race tech springs and gold valves, but I can't swing the 600 bucks at the moment. What are some other good mods that are cheaper? I have a 96 VFR with 42xxx on the clock. Already have bar risers and a micron pipe from the PO. I am ordering a K&N filter and putting that in next pay check but what are some other good mods? I do was doing a 140 mile commute on it and days that it is above 50 I still will be. Thank you guys and ladies for all of hte help I am sure will be coming. ]]> Modifications red0513 http://vfrworld.com/forums/modifications/27342-cant-afford-race-tech.html All Wraped Up! http://vfrworld.com/forums/modifications/27311-all-wraped-up.html Wed, 11 Nov 2009 18:06:50 GMT I had a clearence issue with my streched lower fairing and my exaust on the right side so I added A thermal exaust wrap to the headers and thermal... I had a clearence issue with my streched lower fairing and my exaust on the right side so I added A thermal exaust wrap to the headers and thermal fiberglass backed heat reflective tape to the inside of the fairing. Everthing you need to do this costs about $90(that includes new exaust gaskets). The wrap and tape I used was from a company called DEI(Design Engineering, Inc.) I used their Titanium Exaust wrap. Purchased off of EBAY. Instead of clamps to secure the wrap I used 240# single strand stainless steel tempered fishing leader(No ugly clamps to look at and it only costs about $4 for 15ft of this stuff:thumbsup:)
Attachment 9931

Attachment 9932

Attachment 9933
Attached Images
File Type: jpg img_0015.jpg (46.6 KB)
File Type: jpg img_0016.jpg (41.2 KB)
File Type: jpg img_0017.jpg (42.5 KB)
]]> Modifications steven113 http://vfrworld.com/forums/modifications/27311-all-wraped-up.html Quadzilla making progress http://vfrworld.com/forums/modifications/27269-quadzilla-making-progress.html Tue, 10 Nov 2009 02:48:05 GMT And now for something a little different. Honda VF1000R engine in handmade chopper frame. Image: http://i38.tinypic.com/25kilpx.jpg Image:... And now for something a little different.
Honda VF1000R engine in handmade chopper frame.


]]> Modifications donald branscom http://vfrworld.com/forums/modifications/27269-quadzilla-making-progress.html Has anyone tried aftermarket lug nuts or center cap for rear wheel? http://vfrworld.com/forums/modifications/27262-has-anyone-tried-aftermarket-lug-nuts-center-cap-rear-wheel.html Mon, 09 Nov 2009 23:21:19 GMT I'm trying to think of little touches to make my bike unique and was wondering if anyone has tried some colored/anodized lug nuts whether they're aftermarket or the stock ones or even made/found a little "H" center cap? Pics? ]]> Modifications scotty v http://vfrworld.com/forums/modifications/27262-has-anyone-tried-aftermarket-lug-nuts-center-cap-rear-wheel.html