Hepco & Becker

[]Roger{]

Hi all viffer

just checking out what kind of panniers you used
be it hard or soft panniers
Givi wingrack
bagster
oxford
hepco & becker

have anibody put a set of Hepco & becker rack panniers
ani comment?




BTW the panniers in the picture is junior model

http://www.hepco-becker.de/_eng/frameset.php

[honda502]

Ew, looks like you have to drill holes.

[]Roger{]

after a long wait

[]Roger{]

Originally Posted by honda502

Ew, looks like you have to drill holes.

the only place you got to drill is the license plate and its rear mud flap

[snowparang]

ooh....how much did that cost ya?

I'm more keen in the rear rack and box though.

[DAN-SLO]

Givi-voyager bags

[]Roger{]

Originally Posted by snowparang

ooh....how much did that cost ya?

I'm more keen in the rear rack and box though.

the rack S$350
junoir panniers S$650

as for the top rack S$200
junoir 45 litres top box S$350

[FJWinNH]

Bought a full GIVI set-up from Glen at www.SportTour.com :

Givi PL257+FZ257 (tubular side rack and top case rear rack) $261.00.
2 Givi E36N side cases $159.00ea. $318.00
Total cost: $579 (free shipping)

Pictures of my install

I already had a JC Whitney large trunk that snaps right on the Givi rear rack.

I have a Staintune high pipe on my bike and found an easy solution for the bag interference problems. I just use the stainless steel spacer that Staintune sends you for under the left passenger grip as an extension bracket so I can rotate the pipe down when the hardbags are on the bike.

Pipe position

Bracket detail

When I'm not touring I take the bags and tubular siderack off completely and rotate the pipe back up into the normal high position. Takes about 15 minutes total. I leave the rear rack part installed and can pop one of the E36's or the Whitney trunk on in seconds.