Help - goofy black windshield bolt covers

Discussion in '7th Generation 2010-Present' started by kurtfriedrich, Sep 30, 2014.

  1. kurtfriedrich

    kurtfriedrich New Member

    Joined:
    Sep 25, 2012
    Messages:
    78
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Eastside of Seattle
    These things ...

    [​IMG]

    I just replaced my windscreen. When I took these things off the stock one, the right one had a pretty large gap, and was clearly not really secure.

    Now that I have the National Cycle VStream Windshield (tall) installed, the right side really doesn't want to stay tight.

    If anyone else has had this problem and solved it, I'd love some advice.
     
  2. VFRKEN

    VFRKEN New Member

    Joined:
    May 17, 2012
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    0
    There are rubber grommets that hold those in place , did you remove them from the stock screen and on to the new windshield correctly ?
     
  3. kurtfriedrich

    kurtfriedrich New Member

    Joined:
    Sep 25, 2012
    Messages:
    78
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Eastside of Seattle
    Good guess, but I did re-install the grommets. thanks.
     
  4. jonmarsh

    jonmarsh New Member

    Joined:
    Aug 2, 2010
    Messages:
    55
    Likes Received:
    1
    Trophy Points:
    0
    Location:
    Livermore, CA
    Map
    I used double sticky foam tape (3M) to help secure them.
     

Share This Page