Cloc Question 3rd Gen (90)

green1 · 06-27-2009, 06:18 PM

I just bought a clock for my 3rd gen and am not sure if the harness has the connector for it.Does anyone know if all 3rd gens have a female connector on the harness if the bike didn't originally come with a clock? Or does someone know where the clock is supposed to plug in,there is an empty space behind the cluster where most of the other connection are held,thanks in advance.

Answer is yes,had to remove the upper fairing to gain access but its there.Clock was just bolt on and plug in

SA1713 · 06-28-2009, 05:17 AM

There should be a female plug already on the wire harness just for this clock. Pull the nose cone off (I know, PITA) and look behind the instrument cluster. It should be right there.

green1 · 06-28-2009, 08:06 AM

Yes it was there,i posted the question,waited a wkile then said f-it and took the upper fairing off.It was there,thanks for the reply

ChatBox (New messages since your last visit: 1)
Loading...
Message...
Ask your questions in the forums. The ChatBox is for small talk. Lamps to everyone!

06-27-2009, 06:18 PM	#1 (permalink)
green1 Member Join Date: Dec 2006 Last Online: 11-04-2009 04:47 PM My Ride: 1990 VFR750 View my Photo Gallery Posts: 96 Thanks: 0 Thanked 6 Times in 3 Posts	Cloc Question 3rd Gen (90) I just bought a clock for my 3rd gen and am not sure if the harness has the connector for it.Does anyone know if all 3rd gens have a female connector on the harness if the bike didn't originally come with a clock? Or does someone know where the clock is supposed to plug in,there is an empty space behind the cluster where most of the other connection are held,thanks in advance. Answer is yes,had to remove the upper fairing to gain access but its there.Clock was just bolt on and plug in __________________ Never argue with an idiot, people watching can't tell the difference. Last edited by green1; 06-27-2009 at 08:16 PM.

06-28-2009, 08:06 AM	#3 (permalink)
green1 Member Join Date: Dec 2006 Last Online: 11-04-2009 04:47 PM My Ride: 1990 VFR750 View my Photo Gallery Posts: 96 Thanks: 0 Thanked 6 Times in 3 Posts	Yes it was there,i posted the question,waited a wkile then said f-it and took the upper fairing off.It was there,thanks for the reply __________________ Never argue with an idiot, people watching can't tell the difference.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sidi Vortice boot question?	btay67	General VFR Discussions	9	04-10-2009 01:48 PM
Wife finally on board and a Repsol Question	alex5160	General VFR Discussions	2	01-17-2009 09:30 PM
HID Headlight Question?	CdnVffer	Fifth Generation 1998-2001	11	12-23-2008 12:51 PM
Lame headlamp bulb question	RE-Agent	Mechanics Garage	5	05-25-2007 01:53 PM
NVFRC: RE: XM antenna question	Eric Jaramillo	VF/VFR Mailing List	0	02-27-2006 08:34 PM

06-28-2009, 05:17 AM	#2 (permalink)
SA1713 Member Join Date: Jan 2006 Last Online: Yesterday 07:53 PM Posts: 30 Thanks: 2 Thanked 3 Times in 3 Posts	There should be a female plug already on the wire harness just for this clock. Pull the nose cone off (I know, PITA) and look behind the instrument cluster. It should be right there.