Thanks for responding! Mcch appreciated! It dawned on me this morning that I had forgotten the chain of events that could well have led to the...
Hiho- Recently noticed my cooling fan and temp gauge stopped working. The fuses are ok. Does anyone know where the electrical grounds are...
Yup I noticed that too. Turns out there's no way to tuck them in nicely although I don't know how HIGH they could be mounted before hitting the...
So I had a new set of Dyna Mini coils sitting around and noticed they were 3 ohms as are my VFR coils. In the interest of making things easier...
Thanks Cap'n!! (remember that line from the 1994 movie "Dead On" ?? (8 ) - You are a wealth of information!! thanks again & hope the...
HiHo- Time to replace the original plug wires on my '86 VF1000R. I'd like to keep the factory coils if possible but also curious to find out...
thanks, Cap.
2 questions- please forgive my ignorance- Had a pretty bad fork oil leak. Decided to try a Motion Pro 'seal mate' before taking it all apart...
I know this is off topic but not sure it's worth starting an entire new thread for- is there a way to check the fork oil level without removing...
As a last resort, I clamped a pair of vise grips across the flats on the long part of the axle and put a 4 foot section of 2"x2" box aluminum...
Wish I had one. maybe pull tool kits from the other bikes and see what's in there. Thanks for sending!
Well the flats are about .4" wide so I can try positioning a section of 3/8" (.375") square stock in each then clamping those in a vise and see...
Separate names with a comma.