Hi Were hoping I would sort this problem myself, but after many attempts I must now ask for help since i do not seem to find the issue I am having. So the problem started with my bike getting warm one day and my clutch started to slip, so i searched the net and started my clutch repair. I did repair of the clutch, new clutch plates. I did a service on the slave cylinder with the repair kit, and also checked the rod and it was OK. I did a complete flush on the system. I also have now run air to the hose and master cylinder to eliminate dirt from the master cylinder. I still have the same problem, seems like my clutch is not engaging and especially when it gets hot. Can also say that my clutch has always been hard on the lever and has not engaged before it was almost completely out. So is there any here who can help me to now find the fault, that im not finding. I have barely ridden this summer due to the clutch issue( Thanks for allt he help I might get!
Haha! forgot to mention, but did change the springs also! will check if its overfilled and do a new bleeding! Thanks