Added an edit after trying out a new r/r unit. Could the unit be overheating due to a failure elsewhere in the system? Is it possible for the...
It's virtually unchanged. drops from 73 to 69.
No, the wires aren't soldered and the voltage reads at almost exactly 73v for all 3 combinations at 5k rpm. I haven't checked the solenoid,...
cold approx. idle 13.5v, 5k 14.2v. after 10 minutes of idling approx. idle 12.5v, 5k 13.1v
1991 750f with roughly 70k miles. Last summer I suffered from r/r problems, first the original fried the battery, then a cheap replacement did...
I finally got the bike's rear wheel off the ground. The difference in chain slack is tremendous when rotating! At tightest there's no slack at...
Bolts are fine and front sprocket area is thoroughly cleaned. I couldn't find the master link in the chain if that's what you mean make56. The...
I came to the same conclusion riding earlier today. It's gotta be the chain making the noise. Unfortunately my centrestand rotted and broke so I...
Nah..Nothing there. A lot of greasy dirt though.
Well I'd better investigate.
The noise is unaffected by clutch engagement, it's just easier to locate when engine's quiet. I should mention that my daily commute is 35 km...
I noticed a new sound in my 1991 vfr recently. It's coming from the left hand side somewhere in the front sprocket region. It sounds like an oval...
^ The website is exhausted and must rest for a moment. ^ 1991 in original black paint and 155 pound rider hit 135.5 mph in 2013. Youngsters...
I've gone back to the standard screen from vario touring and am sticking to it. I have paid attention to the way I hold the bars and regardless of...
I can't sense these tank lid sounds at any rpm. There is a weight on the left hand side but nothing similar on the right hand side of the bike. I...
The only thing removed was the left side fairing and the oil level was maintained properly. The vibes do still get my hand if it's already tired,...
The old oil was Motul's motorcycle grade and wet clutch compatible for four-stroke engines. It was the same oil the previous owner had used.
What could possibly be the cause of vibrations if an oil change reduces them? The new oil is castrol power1 10w-40. Edit: Measured the...
I intend to renew the clutch at some point but I haven't got the time right now. What I did though, and what fixed the issue, was an oil change....
Changed back to original screen. The wind on my chest is strong enough to lift all the weight off my wrists at speeds exceeding 110 kph/65mph. It...
Separate names with a comma.