Hand-made Staples & Plastic Welding

Discussion in 'Mechanics Garage' started by VFRVogt, Dec 29, 2017.

  1. VFRVogt

    VFRVogt New Member

    Country:
    United States
    Joined:
    Mar 26, 2015
    Messages:
    107
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Atlanta
    Map
    I've been putting off doing some minor body repair for awhile now and since it's winter...I need to get after that hairline crack on the the lower left cowl. Planning to heat/push a few hand-made copper staples into it from behind and then pretty up the facing side. I think I saw Delboy do it in a video with some solid round wire. I have some flat, copper shipping staples I'm going to shape. I want them to hold the seam together tightly, but I want it to be able to flex for stress too.

    Here's a few I thought up. Which shape do you think will provide the most holding power/flexibility and why?

    Hand-made-Staples.jpg

    For some reason, D is where I am falling, but I dont have an explanation.
     
  2. DaHose

    DaHose New Member

    Country:
    United States
    Joined:
    Nov 7, 2011
    Messages:
    1,003
    Likes Received:
    85
    Trophy Points:
    48
    Location:
    Napa, CA.
    Map
    I wouldn't use staples. The plastic on motorcycle body parts isn't very thick. I'm a fan of stainless steel mesh. Use metal tape on the front to hold stuff in place, and the mesh molds into compound curves really well.

    Jose
     
  3. squirrelman

    squirrelman Member

    Country:
    United States
    Joined:
    Jul 27, 2006
    Messages:
    9,839
    Likes Received:
    743
    Trophy Points:
    128
    Location:
    Buffalo, NY
    Map
    plenty of ventilation is needed as fumes are really BAD ! :squid:
     
  4. VFR4Lee

    VFR4Lee Member

    Country:
    United States
    Joined:
    Aug 27, 2016
    Messages:
    1,100
    Likes Received:
    530
    Trophy Points:
    113
    Location:
    Reseda / LA
    Map
    The Harbor Fright kit I bought had some metal screen that was similar to window screen.
    Seemed to do the trick. Melted that stuff right in there.
     
  5. OOTV

    OOTV Insider

    Joined:
    Aug 20, 2011
    Messages:
    6,479
    Likes Received:
    949
    Trophy Points:
    143
    Location:
    Anaheim, Ca.
    I’ve used staples on a few panels and cowls, they were ‘S’ shaped and work really well. Just need to be careful with the thickness of the staples and depth you take them. Before I did my repairs on “working” parts, I used some pieces from my wreck and did some test repairs. I think I posted my results in my “So it begins” thread.
     
  6. Diving Pete

    Diving Pete Member

    Country:
    United Kingdom
    Joined:
    Mar 25, 2016
    Messages:
    1,969
    Likes Received:
    548
    Trophy Points:
    143
    Location:
    London
    Map
    Why do you need staples? Use plastex and fix it properly..
    I wouldn't use stainless mesh either for a patch as you can use carbon / fibre glass mesh that will do the job perfectly well
     
  7. OOTV

    OOTV Insider

    Joined:
    Aug 20, 2011
    Messages:
    6,479
    Likes Received:
    949
    Trophy Points:
    143
    Location:
    Anaheim, Ca.
    In some cases plastex works well on its own but in other cases, reinforcing with staples makes the repair a bit stronger. I have no issues using or not using staples but when I want a stronger repair, I use them.
     
  8. DaHose

    DaHose New Member

    Country:
    United States
    Joined:
    Nov 7, 2011
    Messages:
    1,003
    Likes Received:
    85
    Trophy Points:
    48
    Location:
    Napa, CA.
    Map
    I always use reinforcement on plastic welds. You do need to make sure the weldment spreads beyond the immediate crack though. Making one part thicker changes how things flex, so you need to be mindful of that.

    Jose
     
  9. tinkerinWstuff

    tinkerinWstuff Administrator Staff Member

    Country:
    United States
    Joined:
    Oct 5, 2009
    Messages:
    7,831
    Likes Received:
    90
    Trophy Points:
    78
    Location:
    Colorado Front Range
    Map
    I’ve always used fiberglass mesh to reinforce the inside after plastic welding the cracks. Haven’t had any issues.

    Wouldn’t be opposed to trying a flexible staple, just never done it. If your plastic weld is good, shouldn’t be necessary.
     
Related Topics

Share This Page