05 VFR800 firing issues

Hey VFR peeps,

Looking for help. The bike will turn over strong but is not getting fuel. I recently had to fix the BAS wiring as the connectors melted so I removed the connector and spliced in directly. The bike was running well until the BAS wire melted so I figured that was the only issue. The bike died while riding. As you will see and hear in the video, something else is strange. When I turn OFF the kill switch and hold down the start button, you can hear what sounds to me like the fuel pump. It did this 4 times and will not do it anymore. The “pump” sound was only while I held down the start button but again, it’s not doing that now…

I’ll take any and all advice/comments with appreciation. TIA!

Troubleshooting steps so far;

it’s worth noting, that before I spliced/soldered the BAS, I bypassed it and it would still not start.

1) fixed BAS wiring
2) cleaned kill switch button with CRC electronic cleaner, 3 times.
3) checked all fuses are OK
4) made sure all connections under fuel tank are secure
5) the R/R and Stator were
replaced within the past year.
6) kickstand up or down, doesn’t make a difference
7) brand new battery today

 

pull a plug wire to check for a spark first to discover whether its electrick or fuel. plenty of fuel in tank of course.........?

 

Noted, will do. Thanks


Sent from my iPhone using Tapatalk

 

if battery voltage is too low FI wont be working rite.

 

Thank you, it is a brand new battery and I triple checked the voltage before I put it on. I just checked the voltage again and it’s perfect.

 

do any maintenance recently ?

 

No sir