So I'm in the middle of putting the new starter clutch back together and noticed the rollers don't quite sit the same. Tried playing with it and...
Had time to get the starter clutch off today, I would say it's pretty messed. Still waiting on the replacement in the mail, Jesus ebay takes a...
It cannot be squeezed. then works completely fine after I bleed it. Locks up again after a few days. Yeah I'm split between it being bad lines or...
So one of the original issues I was having is the front brake handle locking up. I originally thought it was a stuck caliper but when I bleed it...
Yup fun stuff, I couldn't manage to get the starter clutch assembly off either as it did not come off with a cordless impact or a 18" breaker bar....
So got to the starter clutch today and found some issues. The housing is cracked along the edge in at least two places that I can see, looks like...
Yeah I'm 100% going to grab one of them and make my life easier, are the rollers the wear items in the starter clutch? If I don't have cracks in...
Thanks I was looking at this exact one earlier. I don't fully understand how the clutch works so I was assuming it was the teeth on the starter...
Good to know, I will be pulling the starter this Saturday and putting some power to it to see if the noise was from the clutch or the starter. But...
So as I now have the time and money to work on her again the sauga continues. The bike always had a bit of a grinding issue on the starter where...
Updated Post
So I ended up taking the fuel tank off, pulling the fuel pump and changing the fuel lines. The fuel pump was the culprit, whaled on it with a...
Didn't know that, at least jumping the relay seems easier than chasing wires. Yeah trying to rule everything out before I go for the carbs....
Hey guys, new here and was looking to get some advice on my troubleshooting. I recently started working on a 84 VF1000 that has been my dads bike...
Separate names with a comma.
