I'm not sure this is the same problem but I had something very similar happening to me last week. I took off my carbs for experimenting with...
Just in case someone is interested in this issue I got the answer to my question. Rotating rubber intake boots on the carburetor set so that...
So, I put a set of carbs off of 83 vf750f (completely cleaned and rebuilt) on my 85 vf700f. I am getting good performance up to 1/2 of the...
I just discovered that I incorrectly installed intake boots after cleaning the carb set on my 85 VF700F. I did not rotate the boots for little...
Wow, that' s a very good deal! BTW, I have exact the same model/color bike, I wish mine looked as good as yours. Where did you get this...
Sweet! Where!?... It looks like they are not symmetric, the right pipe has a bend (which, I guess, is consistent with the way they were...
.................
I know exactly what you are going through, I own the same model bike and I also had it for almost 10 years. About 4 years ago I had to give up...
I've rebuild all 3 calipers on my bike and no, it is not complicated. The most difficult part (at least in my case) was forcing pistons out of...
That's what I thought too but then I looked at the microfish for 700 and 750 and it looks like they have different cranks as well (at least part...
It's good to know that a 1000cc engine will fit into vf700f, I'll keep looking for one then. As for the economics of the 700-750 conversion, I...
A much easier and effective way (IMO) to bleed calipers on those bikes is to connect a fuel line (or any other rubber pipe that can take gas) to...
Thanks for your reply. I am located in RI. Why I want to do this? Well, I'd like to keep my old bike (it's a 1985 and has a lot of sentimental...
Separate names with a comma.
