That’s great guys, thanks for the input. I’m going to get all the o rings,fuel lines and float bowl gaskets from the V4 dreams website. I’ll start...
Ok gents. Thanks for the pep talk. I’ll do it. [emoji3][emoji106][emoji122] Sent from my iPhone using Tapatalk
Ok, the clutch slave piston is well and truly welded in and not going anywhere at the moment. I was getting a bit frustrated so I’ve left it, for...
I did have a little go with a grease gun last night, to try to pump the piston out. Unfortunately I was doing something wrong and managed to cover...
[IMG] This bike is the gift that keeps on giving, and I’ve only just started. The clutch pushrod, should I be able to push that manually with my...
[IMG] Somebody’s bled the clutch in the past and not wiped up. Paint stripped around the slave cylinder body. Sent from my iPhone using Tapatalk
The good. I now have a working clutch lever. The not so good. I still couldn’t bleed the clutch. With a bit of gentle persuasion, I’ve got the...
I’ve spent the morning tracking down the correct grease and a better set of circlip pliers so should actually have a refurbed clutch lever by the...
Ok, managed to get it out all ok. Will start to rebuild it later this week. [IMG] Sent from my iPhone using Tapatalk
Ok, managed to get it out all ok. Will start to rebuild it later this week. Sent from my iPhone using Tapatalk
Hi guys. Trying to strip down the clutch master cylinder and the piston is firmly stuck. I’ve started to put WD40 down to help free it up, to get...
Hi everyone. After a bit of advice, specifically about overhauling the carbs. I was originally going to see if I could fire the bike up without...
So tried to bleed the clutch and couldn’t draw any dot4 through it. Conceded defeat and took the lever and master cylinder off and lo and behold,...
[IMG] Adding primer to the tank in the sunshine. Sent from my iPhone using Tapatalk
Hi all. Only just started to do a few things on my RC24. Just started to strip off the remaining bodywork and took the tank off to get to the air...
Awesome. Thanks both, for your help. Some great starting points. I have already purchased a workshop manual so I’m ahead of the game there! I’m...
Stage 1 complete, in that I’ve finally had the bike delivers to my house. [IMG] Genuinely don’t know where to start. T Sent from my iPhone...
Ok, now I understand. TBH, not sure why that would no longer be on there or what happened to it.
Not quite sure what you mean by ‘govt frame plate holder’. In the UK we used to have to display a tax disc but that’s all gone online now, so we...
Hi Terry. Thanks for that. Yes, it has a speed indicator light on the dash, although disconnected. Sent from my iPhone using Tapatalk
Separate names with a comma.
