My 97 750 I had, last of the carb version VFR's never had all these issues.
Hi All, Thanks for the responses, I had seen plenty of posts on the subject by goggling around. However all the ones I found initially either had...
Here is a image of the melted connector, its pretty bad. [ATTACH]
HI All, Have an issue, bike had no electrics today when gong to help a mate. Investigated tonight and have found that under the seat near the...
It's back together now, except fairings, ran the engine until it got over the temp to start the fan, then ran for another 10 minutes. The main...
Thanks everyone, probably being a bit of a perfectionist given the noise problem - as squirrelman pointed out. Just putting it back together now...
Thanks Maggot, I have not put it back together yet, really deciding if to do the vtec check, and get second opinions on if this is worth it at...
thanks veijoess, interesting to know clearances should not be causing the noise. I also have a ticking sound, could this be clearances? I have...
Valve clearances, vtec, tensioner and noise Hi All, My VFR has 90k on it, start making noise mostly when warm at idle, went away increasing...
Hi All, I want to cable a usb port in the front left inside of the fairing. I have found a suitable location, but wondering if anyone would know...
The Bike gets to 100 in temperature in traffic and once it gets there it pretty much keeps the cooling fan constantly on. This is winter though...
Hi all, I have a 2010 vfr, right from new this bike has been "a pig" to ride. It is rough on low revs and occasionally surges mid range for no...
Hi All, just had my brand new vfr 800 for a week, I fueled up this morning then on the way home this afternoon I noticed a noise that would...
Separate names with a comma.
