please delete please delete i duplicated mac daddy's post by mistake
Doing okay under the mountains of snow?
This is a new separate thread to focus on DrMac's 25 mpg fuel mileage issue. To summarize: He is the 4th owner, 26k miles, stock '93 with no...
and with all the hellacious traffic-- you guys that ride there got some big balls to split lanes and deal with the idiots in cages on the 405...
Trying to remove the big castle nut (right-hand threads) and need something to lock the shaft. The manual says to put it into 5th gear and press...
Howdy y'all, i know not many vfrs have Givi luggage, but i've got some on one of my bikes so i'll post this here just in case. Have you ever...
i was looking up the parts fiche thinking it would be easy to find and order one, but it's not listed with a part number...? Anybody ever bought...
Makes for smoother starts when letting out the clutch lever too. Basically the stamped-steel clutch plates are mass produced for lowest cost,...
This is typical of most RR used on carburated Hondas, not sure of the FI versions. When the demand loads for current are low and the dc bus...
Kick Out the Jams MF... of Acceleration i like to make these for my bikes-- handy for gear and sprocket selection at the track.
Some jet kits supply a drill bit with instructions to enlarge a hole or put more holes thru the bottom of the vacuum slide. The gimmicky idea...
Here are some pictures of a stripped-naked carburetor body from various angles showing the plumbing of all the carburetor circuits. The reason...
Separate names with a comma.
