It's certainly worth a try, but given the risk I'd rather stick to OEM. Especially with the cost savings of DIY oil changes.
Does anyone know if this is possible? On my bike, I find that it shifts far too early when in regular DCT mode. Only when in manual mode, can I...
No, no bubbles present with the engine running.
+1 on the rad cap. My 2010 VFR1200 DCT is also losing coolant. The last time I went to replace the coolant, I foolishly neglected to replace the...
Howdy Gents, While replacing my rad cap, I noticed the aftermarket one from the Honda shop is rated for 156kpa or 22psi. I'm not sure if this...
I agree with above. I was able to attach the helibars on my 2010 DCT with no adjustment for brake/clutch or throttle cables. The only issue...
I also am losing coolant. I foolishly skipped replacing my cap on the last coolant change. Does anyone know if the CR 85R will also fit it? The...
Thanks, Gents. I'll make sure to keep an eye on the level over at my seasonal oil change. :friends:
After I changed the coolant on my 7th gen, it seems that the overflow tank is a bit low. Since the cooling system on the 7th gen isn't sealed,...
Couldn't agree more. Just had the risers installed on my VFR, and despite not physically looking much different than the stock ones, the slight...
Totally agree on the ear plugs. No helmet can match the ear protection of them. As for the helmet, my Arai has been the best fitting helmet...
Here in Canadaland, we don't have access to ethanol-free fuel anymore.
Totally agree. I just hate to see another forum member get burnt.
Sounds scammy! Careful gents, lots of trash on these forums lately!
Is riding a motorcycle in SA a safe idea? I mean, is it a wise idea given theft/robberies/car jackings?
Very true thanks for the link.
I also have a 2016 Honda Fit and a small stash of Bosch Filters (as I do my own maintenance on it as well). I was amazed at how similar in size...
Ya, seems that Honda still sells the combo for about 35ish CAD. I just ordered it with a few other gaskets etc....
New or used, doesn't matter. Just want to ensure my filter is nice and snug. thanks in advance
Thanks Randy, I was just hoping someone had a few suggestions off the top of their head. I have a factory service manual I bought online for the...
Separate names with a comma.
