the bikes that raced had about $120,000 in special kit parts the "ordinary" RC30's didn't have. ancient technology now as an R-6 or R-1 would...
^^^ the HF ultrasonic cleaners don't last long, typical low-quality chinese junk, as i discovered shortly after purchase. mine took a shit after...
regulator/rectifier......the 'lecktyrickal bit that charges ur battry when it's working right.
what this cuntry needs is another lee harvey oswald ! go to utube and look at the work of david cay johnston, the man who has researched most of...
that's a really, really rare bike yessir !
56k miles at that mileage the wheel bearings should already have been replaced and the steering head bearings maybe twice.
he'll probably go to work for them after losing his present job.
dija get around to testing the compression ? i know you're having fun, but it looks like you are doing a hellofalot of unnecessary work, pulling...
if your '86 is like mine the cdi has 3 plugs and one snap connection. check to see if there is a wire coming out of the rear of the front head;...
you'd be way outnumbered by liberals and feel persecuted. :confused: over 7 0% of canadians favored the election of j. biden, unlike you.
china has yet to hire it's first quality control inspector. the last HF item i bought had a defective on/off switch from new.
[ATTACH] ********worst thing is that mices sometimes pee in nest, and the pee is extremely corrosive and can ruin carbs.*******
in the country that started the industrial revolution that O-ring must certainly be available maybe under a different description.
I've used a little kitchen cleanser on a Q-tip to clean and polish needle seats, but it takes alot of washing to remove all traces of it. i don't...
OEM steering head bearings are usually shot by about 35K miles and need replacement. bad bearings loosen up and feel sloppy but don't get tight...
for safety, never ride a bike new to you until you've checked the tire pressure on both wheels and corrected as necessary. nothing to do with...
good work, but what about a replacement for broken mounting posts for grommet connection on frame ? a 3-D copy would be super-useful for panel...
as a beginner bike with younger riders when new, most were not well or properly maintained, and now left sitting for years, they suffer more....
i refuse to discuss the time in april 2017 (2 blocks from my shop and @4am) when my hawk fell over (speed zero) on and trapped my right leg...
there are vents in the carbs and a vent in the petrol tank, so yes, some odor is normal. :rolleyes: try to find a way to ventilate the garage.
Separate names with a comma.
