Might have to get it re-blessed after that cleaning.
Somebody nab this. Really glad it is literally as far away as possible from me in the US, here in Seattle. Good luck with sale.
The original configuration of that system did indeed have an intermediate pipe. But it incorporated a welded bell section that the aluminum...
Ohhhh.... I think it has bar risers installed and they used those to "dress up" the extender fork caps?
They look like "Caplugs" that we use at work to seal tubing fittings after clean. [ATTACH]
I do, and don't, wanna know about those fork caps.
The angle out of the collector and then the turn to clear the chain is critical. And the ID of the interface. The problem is you won't know...
Flex pipe? Um no. You will get laughed out of here. BUT, picking two cans of your choice and then having some real connecting pipes made......
Slip on is pretty much considered anything less than a FULL system. The connecting pipe and muffler portion is replacing the stock one piece...
Gonna have to just keep searching often, they do pop up. Systems for 1983 - 85 VF700/750F are the only ones that will fit. It will be near junk...
If you are looking at the same Clymer manual cover I am (your pic didn't work... this site doesn't like links), that is actually a VF1000F, but...
Was it particularly nasty? Anyway, should be ok if you want to. I tend to try and be the least aggressive I can. I will use a garden hose on...
Yes, the cables are still kinda a bitch. Maximizing the free play on the throttle cable helps a lot just getting the cables on. Then take out a...
The wife and I do a damn good brisket. We've got it down and even got approval from a Texan transplant that knows BBQ / Smoking. It's actually...
And bologna religion something something derp
Good plan on the o-rings. Now is the time. Install throttle cables, THEN install carbs. Just flip them over in place above the insulators....
Maybe you can, cuz I can smell that just fine. mmmmmmm
Yes, since that is the fuel line. That attaches right to the petcock on the tank. [ATTACH] The open tube on the left is the vent line and does...
Yep.
84/85 are fed by a pump up to the front left carb as straycat has noted. 86 eliminated the pump and gravity fed to a larger inlet between the...
Separate names with a comma.
