The (good) welder might be the best person for this advice.
Um... it's "GIXXER" dude. As in, "Then I put on my flip flops and mesh tank top, hopped on my Gixxer, and rode to the gym."
That is cool AF
Thanks! I thought so too. I originally made it for a 1990 that I was flipping, but I was so happy with it, I made another slip-on with a...
First run video: [MEDIA]
Between the carb and plenum will be OK. Clean and red rubber grease or o-ring lube. If one seems damaged (unlikely) you can Hondabond no...
Fuckin' cool. I swear that thing already sold (or was pending or something). Looks like it didn't go thru.
Here's the best I can do, and realize this is what I chose to do and I have had ZERO issues over many miles: New sprocket hub outer spacer is 7mm...
76 x 2 mm Float Bowl o-rings 99% of the time when I get into carbs, the fuel cross-overs and float bowls are really the only things that are...
Remove EVERYTHING. Each carb has a vent spigot that needs to be capped/plugged. I found it is easiest to re-use some of the small vacuum hose you...
Fired instantly (after putting ground bolt in for wire harness). [ATTACH] Burned off some smoke and the fan cycled a bunch of times. [ATTACH]...
There shouldn't be that much difference. Are your levers still OEM or aftermarket?
Fuel tube: 7 x 2 mm I can update later with the float bowl o-ring.
The job is not "hard", it's tedious. A good work space you can lay everything out in the "exploded view", without risk of being disturbed.
I sell you a stock shock.
Yeah.... don't bother trying to rebuild. They are not easy nor worth it. Is this bike for sure a flip?
ASSUMING THE CARBS ARE CLEAN AND PROPERLY ASSEMBLED, pulse generators would be my next step. Unfortunately, it will be confirmed by part...
On the way to breakfast this morning and my neighbor hands me a rear brake caliper he found for his custom '68 Triumph. He thought it was a good...
bmart always has some good insight on suspension and sees/ experiences what proper suspension can do for you. If you're coming from years of...
Cool. Is that a stencil used on the winker housing? Think Ive seen you do that on some other stuff. You really want that site glass to come...
Separate names with a comma.
