All VFRs should have very neutral steering, my 5th gen requires no thought from me in that regard. As the Captain advises, check tyre pressures...
The VTR250 manual that I have specifies 0.17 mm intake and 0.22 exhaust. This is for the MC33 (1997?), the one that has a trellis frame like a...
THERE NEEDS TO BE SOME BALANCE TO THAT TIRADE SQUIRRELMAN, SO I TYPED THIS IN ALLCAPS AND WITH CAREFUL SPELLING TO COUNTER YOUR LOWER CASE...
The regulators are keen to ensure that your lights don't dazzle on-coming drivers. There are plenty of aftermarket LED bulbs available that have...
If you buy proper LEDs the emitters will be in the same physical position as the filaments in the halogens, so the beam pattern shuldn't change...
On my 99: No mods at all to the engine, intakes, exhaust, except PAIR valve delete. I have a Delkevic muffler for when I'm feeling naughty....
The most I've ridden The secret here is regular use that keeps the fluids circulating and stops your carbs from gumming up. I see no reason not...
I had one of those, back in the day. I borrowed it for an evening test ride from the dealership I was working part-time at, but managed to crash...
The front cowl bra stops the front of the bike jiggling around on bumpy roads. Or so I have read.
Having owned a couple of new RWB 700's back in my formative years, the sight of that diagonal text across the white tail brings back some very...
Meh...just a VFR800 in a fancy frock. I'll see myself out now... Built by Honda for world superbikes when they were facing off against Ducati...
I haven't heard of a dim display but when the display dies completely, the fault is apparently corrosion damage to the circuit board in the...
Sort-of, bikes (and ATVs and tractors) can have a two-line plate that is taller and narrower, or the landscape format that I have on the MT-10...
I've had this one for quite a while. Personalised plates were released here in 1987. The plate is currently on my MT-10 just to confuse everyone....
My brother in law's VF1000F2 had poor starting and I recall that starter motor brushes were the cause.
That is sad tale about the earthquake and the VFR jigs Skids.
And a great loss he was too.
That's true, the XX is still a bike that I aspire to owning one day but I suspect the ride position might be too much for ageing wrists. Is there...
Check the resistance across the connector terminals as is (dry) and then immersed in fuel. If you see a difference then it should be working.
The sensor (its called a thermistor) is likely to be the same as many other bikes including those that use a fuel gauge. I believe it senses the...
Separate names with a comma.
