I agree with OOTV, if you have a Shoei, get the pinlock inner shield on your visor. Being in FL, you don't have this problem very often, but the...
I agree with MrSleep, most likely bad ground, blinkers are finding their ground back though other components. Check all connectors for corrosion....
Welcome, clock will reset every time you lose power. Press and hold RESET and SELECT buttons for more that 2 seconds. Then use RESET to advance...
Power Commander V, I have used PC III and it made a lot of difference in the 1200-3200 RPM Range. Plenty of threads on "fuel mapping" and Power...
Try some "LockEase" a graphite oil for locks. Let it run down the cable too. Won't do much for the Aggies.
Just some minor tweeking will make the underside fit your bike better. I'm not impressed with bikes latching system!
Lucky dog, all you have to do is wait till it gets warmer...10 degrees now in The Finger Lakes! BTW I rode 100 mi today, sunny and 61.
I don't think there is enough mechanical advantage in the key/cable/latch arrangement to overcome friction a tight fitting seat induces. A little...
I didn't have problems for a couple of months, don't know what caused it, key lock mounted in plastic does not give firm feel, I twisted my key...
Yes, I nearly broke off my key, 20 miles from home, no spare key! I had bike several months before problem, seat came with bike. I lubricated...
Still think it is clutch/kickstand wiring/switches. Not a serious problem to fix, certainly would not be a reason not to grab a great deal on a...
Read the symptoms carefully, quits when clutch engages switch, comes back on when dis-engages switch. Hope you can read this:[ATTACH] Clutch...
My 03 Silver, non-ABS has gold disks, linked brakes, best way to tell:[ATTACH]
I lived in the Finger Lakes for 23 years.
What part of NY?
There is a switch on the back of the clutch master cylinder that is in series with the switch on the kickstand, that kills engine in any gear...
My bike came with one when I bought it, love it. Had a small problem with plastic cowl over passenger section not letting me press directly on...
Sparks should be expected, starters draw a lot of current. Did starter turn or do anything? Inside relay is a thick shorting bar that goes across...
Put meter on other terminal of relay, does it 12.63 volts when it clicks? Put meter on stud of starter, does it read 12.63 volts? If other...
Wouldn't want to split lanes with those, lucky to have enough room in the lane!
Separate names with a comma.
