Always best proceedure to recheck coolant level after a 20-30 mile ride under the rad cap, not the overflow bottle !!! There are various...
Could be warped clutch plates, but more likely, as you say, master cylinder probably needs new seals. Both symptoms show that the clutch is not...
Since the fan motor is DC, it would seem possible to reverse the rotation by switching the power leads around i guess. If not, it will only cost...
In difficult cases like yours, you might get better results by bypassing the wiring harness lead to ground entirely. Tap into one of the GREEN...
Normally, at idle the battery is discharging slowly and doesn't staRT getting a charge until around 2200 rpms or so. In your case, with a new...
Proppa carb draining before storage involves simply opening the drain screw at the bottom of each float bowl.
[ATTACH][ATTACH] It's a classic case of plugged pilot jets, and usually carb spray and compressed air are not sufficient to cure the problem,...
You can get decent results by cutting a small "V" along the joint and using about a 40 watt soldering iron with a broad tip to melt and fuse the...
I refuse to endorse any of corporate Americas garbage that no one needs, and if i did try Rotella, i'd never admit it ! All anyone can say is "...
Cuz sportbikers are so uncommon in corn, pig, cow, and soybean middle America that anything BUT an H-D marks you as a suspious radical suspect of...
Riding a Japanese bike in H-D City might be considered subversive to AMERICAN Values, eh ??
Riding that VFR for the first time will be like every Christmas morning you ever had at the same time !!~
The three wires are interchangable, so it doesn't matter which connects where.
START by inspecting all 4 plugs. If one or more are black--rather than the medium tan color that's ideal--you might have a leaky float needle/s....
Photos, please.
Missippi is #49th in eduction. I rest my case.
Forget it, Bunky !! You seem like a snake oil salesman. There are hundreds of other products that do the same equally well, so are you a paid...
The re-welding is evidence of crash damage. Big deal, the rear subframe might be a bit tweaked but the frame might be straight; it's still a...
Don't sacrifice looks for safety; bar-end mirrors don't work as well as stock, and where you need to look is awkward, so you won't be using the...
:welcome: Overpaid ?? You won't think so after you get it running reliably and you're cruising slowly along a quiet Virgina lane on a sunny...
Separate names with a comma.
