i think they're necessary during engine build machining to line-bore the cam journals.......?
Jamie daughtery is THE MAN for bikes like yours!!
force some liquid or air through the hole and see where it exits
vt viffer has your solution, but it smells terrible!! you need a soldering iron larger than for electronics and need to melt/fuse the parts...
you need to check the output of your charging system by putting a voltmeter across the battery terminals with engine running about 5000 rpm; you...
crappy running and low fuel mileage suggest choke cable maybe not returning fully to off position. check your sparkplug colors and replace...
you can't reason with irresponsible showoff idiots who think wheelies on the street are "COOL, man" !
i've got the swingarm, shock, and linkage from a '96 that i need to sell.......$335, will separate.
all open equally in unison.... i've heard of the plastic T's cracking, so check if you thought getting the carbs OFF was tough, getting...
air corrector jets???
find it on a parts "fish," where all parts are named
HEY, why not try opening up the mixture screws another 1/2 turn?? (But, damn it's a BITCH getting the screws turned on this bike !!)...
OBAMA'S first appointment, Rahm Emanuel, is a poor choice because he's a Clinton left-over and because he's much too consistent a supporter of...
you can easily wire a manual switch in parallel with thermo switch to turn fans on earlier......
hey, are you assuming that float bowl gaskets need to be changed every time ??> not true, and cheap gaskets can be obtained through a company...
not a useful question because the difference between proper fuel quantity and wrong is too small to measure accurately. just experiment by...
slider pins need grease??
with some filing/grinding i think pegs from CBR 600s fit.
better be qualified as a neurosurgeon.... cuz those wires and stuff are very delicate and can easily be damaged
on this one i must differ with Mason (usually right on the money) and think separating the carbs is not necessary or desirable.... what you do...
Separate names with a comma.
