Sweet 4th gen! :Rockon:
Hope it works out for you...I have seen other members use them and came out ok.... I would probably go that route if Spiegler wasn't so convenient.
https://www.motorcycleradiators.com/pages/radiator-repair
Always drool every time I see an RC....:D
You might look at https://www.coremoto.com/category_s/4085.htm Probably the least expensive option. Do the clear tubing trick as I mentioned...
On the 8th gen is that a storage area on the tail where the key is? Or....? :bruce2:
What did the previoius owner do to get the rotors to fit correctly ?. Having just gone thru a large bling it project of wheels, calipers, forks,...
I dont have direct experience, but I have seen posts of guys mounting 8th gen aftermarket cans on 5th gens. If I was looking new, that's probably...
Fucking agree on that!! :Rolleyes:
Sixdog... dude gotta ask, what is that trailer? Very Cool....
^^^^Thanks skimad...good thoughts... always enjoy your "white papers." :)
I live 10 minutes away from Spiegler, I just spec'd out the front lines the way I wanted them. Rear..I am using just 1 stock line. Typically for...
I saw sixdogs trailer and wondering waht brand it was. Kinda looking for something, one rail is fine. Wish list....Automotive size wheels, load...
https://vfrworld.com/threads/how-to-fix-common-regulator-stator-failures.39277/#post-366564
Worst thing I hit was a small bat square in the face shield. The thing shit all it had all over me and the bike....yuck! Was cleaning the bike for...
^^^^^Been there done that!....
I like this cable lube stuff for slipping on boots/rubber together. Use a very light film of it. Work it on with a Qtip. Dont go overboard.......
Another note... if you go with VTR1000 fork lowers/VFR800 upper tubes, you will need to figure out a mudguard mount. I used to machine these for...
Shopping list... 1 set of F4i forks Front set of calipers options: - F4i/RC51,SP2/954/CBR600 Suggest get the matching OEM master cyclinders,...
Terry of New Zealand posted shot of his 5th gen with converted F4i forks and delink. If you go down that road it's a project in itself. I did...
Separate names with a comma.
