Sounds like the water pump is working fine. BTW, this is exactly my VFR's temps this week on the way to work, without the eventual overheating....
BTW, the manual does spec 20psi max on the cooling system.
I think your head gasket is ok. Seeing the reservoir completely full doesn't feel right to me, like it shouldn't be blowing that much out of the...
Just to close the loop, I went with another pair of Sidi boots, not the Dainese. Then another pair of Sidi. Then another pair. Although my feet...
And, the last non-OEM (Gates) cap I used was junk, bike overheated every time. Put on a used known-good OEM cap and stopped overheating.
I remember when he posted that LF3 tribute. Seemed to be a good man, condolences to his family and friends.
Overflow tank hose is connected to the nipple at the filler neck or on the radiator body?
Have you checked the air bleed hose from the thermostat housing to the right radiator and the overflow tube from the right rad to the reservoir...
You can adjust ignition timing with PC2. I never heard of a Cali version of the PC2 btw. I used a standard PC2 on my Cali version 5th gen. There...
I've got all the old maps and software if you need them, send me a PM.
Looks like it's actually in Penn Valley, Nevada County, about 15 minutes from me. I did a '85 VF1KR project a long time ago, not sure I have the...
Yeah, this. It would have been nice if there was a chance at a VFRD pre-retire announcement, emails exchanged, glasses raised, high fives on a...
The vfrd.com domain expires this year but Miguel said the database backups were corrupted, no backup newer than a year ago, the drive array...
Looks like VFRD is no more, hard server crash and not going to be resurrected. Owner posted notice to FB group. RIP VFRDiscussion.com
119,000 miles on my '99 but barely ride it anymore as the Multistrada gets all the mileage.
Congrats, beautiful bike. I sold my '85 1KR and 3-4 years later bought it back, right of first refusal of course. ;)
Reserve was $4500 so it just hit that.
Right, I'm thinking of the OEM header exit vs. the TBros. I have a high mount TBros and tried a OEM muffle and a couple of slip-ons made for the...
IIRC, the high mount and low mount versions of the TBros header had different exit angles, so the mid pipes may not be directly compatible.
That's right about what I was thinking/hoping, but I am in the middle of nowhere so may not get much interest.
Separate names with a comma.
