Any chance you have part numbers [emoji6]? Sent from my SM-S911U using Tapatalk
Alrighty. So I tried using a sacrificial fork leg clamped into the lower leg to try and bend the clamp. Doesn't budge, and the triple is kind of...
Yes 500 interceptor Sent from my SM-S911U using Tapatalk
Yep. The right one is a little hesitant to enter the top clamp also. I can for sure use one of the spare tubes to try and get that lower back...
https://i.supaimg.com/57c94134-0f27-419d-a742-a57f793fc871/ac6c1820-d43c-49b0-b7a5-fd1872a878b6.jpg Pic of left fork inner inserted into lower...
@Captain 80s [emoji106] Sent from my SM-S911U using Tapatalk
Well, not much change in the fork position with the newer eBay slider . On to the left side. Too bad the left side replacement has a slight bend...
I have another inner slider I'm going to swap in. I took that creased one and laid it on the bench and it wobbles on a good portion of the...
https://i.supaimg.com/57c94134-0f27-419d-a742-a57f793fc871/2c2df62a-30fc-4e5c-a3d3-16483d5e620c.jpg That image show or is it a link? That looks...
Wow. And the buyer is still gonna have a nightmare with the tank Sent from my SM-S911U using Tapatalk
Yeah.. is the idle supposed to gallop like that? Sounds like maybe missing a cylinder at idle. I've never held the throttle open on a cold start...
Yeah I was researching and saw people using old innertube material or plastic margarine tubs cut to fit to shim the rubbers. I'll go ahead and...
Installed a better condition tail fairing panel and adjusted chain slack. New clutch lever and bushing.. man you could really tell the old ones...
Shock installed. I think it was harder to get the muffler off than to do the rest of the swap Electrical panel I took the bolt out and let it...
https://i.supaimg.com/57c94134-0f27-419d-a742-a57f793fc871/3433a03d-d1db-44f8-b8e8-cd21a57fb384.jpg Does that work? Sent from my SM-S911U using...
Upgrade is here! Now if I can find the time for the install.. [emoji849][IMG] Aaaaaaand the pic doesn't show. It's the YSS rear shock...
I don't have a wheel balancer, but we have an industrial CNC router/milling machine at work. Pretty sure that table is Flat. if it's not...
Looks like the package was here for delivery.. But I was out doing errands and it needed signature [emoji2959][emoji2959][emoji2959][emoji23]...
I'm already eyeballing a set of used forks on eBay. Or my work buddy suggested a hydraulic repair shop that could straighten the tube if it isn't...
Still here. Still working with the 500.. I went on a ride today although it's getting super hot and muggy [emoji2961]. Bike still handles...
Separate names with a comma.
