As the engine starts normally and there are no blinks and the light stays on I'm thinking the problem comes from one of the reasons from this...
Yes it starts and runs well I can not get it in diagnose mode, the FI light does not blink at all. Bike on side stand, kill switch on RUN, paper...
I will check everything again, also got a new battery ( the old one wasn't even the right spec, 12V 11.8 ah). Could it be that the bank angle...
I checked the voltage of the battery and it says 12.8V, with the engine started the multimeter read is 13.5 to 14V. I then put the multimeter...
I tried to read the error codes but the FI light is not flashing, absolutely nothing, it just stays on and nothing happens. Found some things on...
Hello everyone, I took my 1998 VFR for a spin yesterday after two weeks of standing ( rainy and cold weather), started without any issues, went...
I will check again the pair valves after a couple of days, if the oil comes back will dive deeper to look for the problem. Thanks again.
Update: Today I opened the pair valves again and found them full of oil again so I took the head cover off and found a missing o-ring on one of...
Ok, thanks for the advice
My fear with piston rings is that I will not be able to find here fitting and quality parts, but will see. The air intake box is clean and dry,...
Hello everyone, I've got my self a '98 VFR this year with 70k km( as my first bike). At the beginning it was running ok then started slowly to...
Separate names with a comma.
