3rd gen Part out

Discussion in '3rd & 4th Generation 1990-1997' started by labatt50, Jan 10, 2012.

  1. labatt50

    labatt50 New Member

    Joined:
    Sep 7, 2010
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    Hi, sorry if it does't belong here (if moderator prefer, i can transfer to the classified...)
    Well, vfr are getting rare... and i miss time to fix, and mod the one i had. Unfortunatly... i bought a cbr900rr, the easy way for me.

    So i have my vfr750f 1991 for part out. (engine/rear swing arm and wheel/complete harness with ecu/ tail fairing) ---> sold localy and here on vfrworld.

    i do have an offer for two fairing part (mid left and upper right)

    here just a couple of pics
    i do have some misc other part and bolts...
    and a red transparent windscreen.


    up for grab:
    -both mirror
    -tank
    -headlight
    -front wheel/tire
    -front forks
    -controls
    -pegs
    -front spoiler
    -seat
    and some others...

    waiting on buyer:
    -right and left clip on


    what is not for sale anymore

    -cluster in kph-frame
    -left upper fairing
    -left mid fairing
    -left lower fairing
    -right upper fairing
    -right mid fairing
    -right lower fairing
    -solo seat
    -engine
    -rear swing arm
    -rear wheel
    -complete harness with ecu
    -tail fairing


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    I have an ebay account (labatt2k)
    i have vouche on other forum (mostly honda car... like d-series.org under labatt2k, honda-tech.com under labatt50, forum.clubcivicquebec.com under labatt50)
    i'm paypal verified. Note that i live in Canada!! Canuckland...
     
    Last edited: Feb 23, 2012
  2. ridervfr

    ridervfr Member

    Country:
    Belgium
    Joined:
    Dec 26, 2009
    Messages:
    4,019
    Likes Received:
    137
    Trophy Points:
    78
    Location:
    South FL
    Map
    Hey Labatt! I knew you were a Canuck cause of your name, good beer too ; )
    Are the clip-ons straight? How much for the right hand bar? No controls nothing, just dah clip-on.

    Kinda makes my eyes all weepy and shit, looking at the poor gen 3 bikie in dimantle like that.
     
  3. labatt50

    labatt50 New Member

    Joined:
    Sep 7, 2010
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    i know!! that was such a nice bike, for me the 3rd/4th gen were the best vfr! i was really hoping to do something with that bike (i rode it 2 year before switching for a cbr900rr).

    I'm the dude with nice project, i did have 3 homemade turbo car before... i built an all motor setup, then a 250hp 1.5liter... but now i went back to school in mechanical engineering. So, i went the easy way... bought a 10'000miles old cbr900rr.

    But for the whole right clip-on with control, 30$ shipped... good?
     
  4. ridervfr

    ridervfr Member

    Country:
    Belgium
    Joined:
    Dec 26, 2009
    Messages:
    4,019
    Likes Received:
    137
    Trophy Points:
    78
    Location:
    South FL
    Map
    Hey, turbos are interesting. I have personally seen turbo Hayabusas put out over 300 hp on the dyno, dedicated drag race machines that you could actually ride to the corner store to get a quart of milk.

    I only need the clip on, no controls nothing. Its straight right? My gen 3 bike gets less action than it did a few years ago. As the years go on, she improves with age if you can believe that. Slowly old parts get replaced with new. I take it out at least once a week, and this week-end I am planning a trip with dah wife out to the everglades which should be over 200 miles. CBR900 is a great bike to work on!

    Let me know how much for the bar, up late tonight :smile: any-whooooo...We do have the riding weather here.
     
  5. labatt50

    labatt50 New Member

    Joined:
    Sep 7, 2010
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    ok, i'm off work tomorrow, i'll get a pics of the right clip on only ;)
     
  6. Zland76

    Zland76 New Member

    Joined:
    Jan 24, 2010
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    0
    If it falls through id take both clip ons,
    And is pic 5 a rear seat cowl? Id like that
     
  7. labatt50

    labatt50 New Member

    Joined:
    Sep 7, 2010
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    updated first post, pm replied
     
  8. Nitrousva

    Nitrousva New Member

    Joined:
    Jan 28, 2008
    Messages:
    159
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Richmond
    Map
    Received the speedo today, looks great thanks!!
     
  9. BluRoad

    BluRoad New Member

    Country:
    United States
    Joined:
    Sep 20, 2011
    Messages:
    143
    Likes Received:
    26
    Trophy Points:
    28
    Location:
    Antioch, IL
    Map
    PM sent. 12345678910
     
  10. Bulok

    Bulok New Member

    Joined:
    Nov 22, 2010
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Windy City
    Are the foot pegs still available? I'd be interested in those.
     
  11. labatt50

    labatt50 New Member

    Joined:
    Sep 7, 2010
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    yes they are, do you need all four? front and rear?
     
  12. Bulok

    Bulok New Member

    Joined:
    Nov 22, 2010
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Windy City
    Right now I only need the left rear. Do they come with the mounting hardware?

    However, I have acquired another frame and engine and do have plans on building it so I could use the complete set.

    How much are you asking for just the left rear? How much for the complete set? This will determine if I can get the set now or have to wait.
     
  13. labatt50

    labatt50 New Member

    Joined:
    Sep 7, 2010
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    yes i do have the mounting hardware.

    For the rear left one maybe 15$ plus shipping or the whole set 60$ shipped
     
  14. Bulok

    Bulok New Member

    Joined:
    Nov 22, 2010
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Windy City
    I can do the whole set. I'll send you a PM.
     
  15. rogersj3

    rogersj3 New Member

    Country:
    United States
    Joined:
    Apr 25, 2010
    Messages:
    80
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Cincinnati, Ohio, United States
    Map
    How much for the forks and/or the tank? Shipping to 45150 Milford, OH, USA.
     
  16. Make56

    Make56 New Member

    Country:
    Finland
    Joined:
    Aug 4, 2010
    Messages:
    66
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Kirkkonummi
    Map
    Did Nitrousva by just speedo or the whole set? I have a need for temperature gauge only.
     
  17. BLUE_MKIV

    BLUE_MKIV New Member

    Joined:
    Mar 20, 2008
    Messages:
    30
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Pen Argyl, Pennsylvania, United States
    Hi,

    do you have the exhaust? Complete? How much shipped to 18072?

    Thanks,
    Dave
     
Related Topics

Share This Page