Fitting a powerbronze hugger.

Discussion in '8th Generation 2014-Present' started by Nelix, Jun 4, 2016.

  1. Nelix

    Nelix New Member

    Country:
    United Kingdom
    Joined:
    Apr 25, 2016
    Messages:
    776
    Likes Received:
    154
    Trophy Points:
    43
    Location:
    Paisley
    Map
    I bought the powerbronze hugger recently and fitted it today. It looked relatively simple from the instructions, but as usual it was not. So I thought a wee "how to" may be helpful for anyone else buying this.

    I bought the white with gold mesh as I have gold levers. It's pretty much on a par size wise with the hugger Honda do for the 8th gen, bit much nicer imho.

    [​IMG]

    Kit contents;
    1 hugger shell
    1 bracket
    3 grommets
    3 spacers
    5 m6 x 16 screws

    [​IMG]

    Push the 3 grommets into the holes in the hugger and insert the 3 spacers.


    [​IMG]

    [​IMG]


    Then I cleaned up the swingarm.



    [​IMG]


    Next you have to remove the two rearmost plastic covers on the swingarm.

    [​IMG]



    This reveals two holes that the bracket will screw onto. It is fairly difficult to get access, I used an allen bit with a socket then tightened them up with a key.


    Bracket in place.


    [​IMG]

    The instructions tell you to fit the bracket 1st and leave it loose, I fully tightened the bracket as I had no extra pair of hands to hold the hugger in place whilst attaching to the bracket, in hindsight it may have been easier to attach hugger by the lowest screw first before attaching the bracket to the swingarm.
    I found once again access was a problem and getting the lower screw through the hugger into the bracket was a total PITA (hence why it may be better to attach the hugger to the bracket first.) In the end I simply used a longer screw and it was a dawdle.

    Finished article.

    [​IMG]

    [​IMG]

    [​IMG]
     
    Bubba Utah likes this.
  2. RVFR

    RVFR Member

    Country:
    United States
    Joined:
    Jan 10, 2006
    Messages:
    8,006
    Likes Received:
    265
    Trophy Points:
    128
    Location:
    Olympia Wa.
    Map
    One word.."NICE"
     
  3. ManxVFR

    ManxVFR New Member

    Country:
    Isle of Man
    Joined:
    May 22, 2016
    Messages:
    109
    Likes Received:
    66
    Trophy Points:
    28
    Location:
    Isle of Man
    Map
    Looks great
     
  4. Lint

    Lint Member

    Country:
    United States
    Joined:
    Aug 7, 2012
    Messages:
    4,805
    Likes Received:
    950
    Trophy Points:
    113
    Location:
    Simi Valley, Ca.
    Map
    That's three.... :courage:

    It looks really nice.
     
  5. jorgescar69

    jorgescar69 New Member

    Country:
    United States
    Joined:
    Jun 23, 2014
    Messages:
    477
    Likes Received:
    20
    Trophy Points:
    18
    Location:
    La Puente, CA, United States
    Map
    I love it!
     
  6. andy kingdon

    andy kingdon New Member

    Country:
    United States
    Joined:
    Dec 20, 2017
    Messages:
    24
    Likes Received:
    19
    Trophy Points:
    13
    Intereested in those levers - could you post a few more pics? and yes, I know I just revived a thread from the dead
     
  7. Vulcanator

    Vulcanator New Member

    Country:
    United States
    Joined:
    Feb 4, 2018
    Messages:
    247
    Likes Received:
    102
    Trophy Points:
    43
    Location:
    Portland, OR
    I bought the genuine Honda rear tyre hugger, It was a bit fiddly to tighten the Allen screws on the swingarm, but I got it done in about 20 minutes. Like yours, it looks pretty good.
     
  8. Nelix

    Nelix New Member

    Country:
    United Kingdom
    Joined:
    Apr 25, 2016
    Messages:
    776
    Likes Received:
    154
    Trophy Points:
    43
    Location:
    Paisley
    Map
    Levers are just cheap Chinese from ebay, can post more pics if you want.
     
  9. philois1984

    philois1984 New Member

    Country:
    Australia
    Joined:
    Jul 11, 2016
    Messages:
    118
    Likes Received:
    71
    Trophy Points:
    28
    Location:
    Queensland, Australia
    Map
    Hi Nelix, I am just about to order one of these and found this very helpful. Nice to know your info is still helping people almost four years later.Thanks Phil.
     
  10. Nelix

    Nelix New Member

    Country:
    United Kingdom
    Joined:
    Apr 25, 2016
    Messages:
    776
    Likes Received:
    154
    Trophy Points:
    43
    Location:
    Paisley
    Map
    Holy thread resurrection lol.
    Thanks for that Phil, this is the first time I've been on the site for about a year I think. Glad this may be of some help to you.

    By coincidence I fitted a hugger to my Z1000SX yesterday and it was more of a PITA than this one was to do.

    [​IMG]

    [​IMG]
     
  11. philois1984

    philois1984 New Member

    Country:
    Australia
    Joined:
    Jul 11, 2016
    Messages:
    118
    Likes Received:
    71
    Trophy Points:
    28
    Location:
    Queensland, Australia
    Map
    How do you find the Z1000SX? I have been admiring the new 2020 ”Ninja” 1000SX. Has everything I want apart from a V4 motor and a Honda badge (have owned two Kawasaki’s and loved them) 4D4EDE2F-90F8-4CBC-AEAA-593658AC0D05.png
     
  12. Nelix

    Nelix New Member

    Country:
    United Kingdom
    Joined:
    Apr 25, 2016
    Messages:
    776
    Likes Received:
    154
    Trophy Points:
    43
    Location:
    Paisley
    Map
    I'm also a Kawasaki guy (Sssh). I sold a ZX10R to buy the VFR as my GF wanted to go pillion.
    She lost interest last year, the VFR was at the end of its finance term so I was in a good position to change.
    Almost bought a 2019 Fireblade, but at 56 decided I didn't want to go back to such an extreme riding position.

    I liked the VFR, but to me the Z1000SX is the far better bike. I missed the power of the ZX10R, the VFR was 70hp down on it. The Z1000SX being 140hp is a perfect compromise. It is more comfortable than the VFR was, for me anyway (I had to put bar risers on the VFR) and obviously a lot quicker. I'm no Rossi, but it handles as well as the VFR, in fact if pushed I would say better. The Z1000SX is also lighter.

    I quite fancy the 2020 Ninja, but I've just put a hugger, heated grips, rad guard, tail tidy on mine, so it will be staying a couple of years.
     
  13. philois1984

    philois1984 New Member

    Country:
    Australia
    Joined:
    Jul 11, 2016
    Messages:
    118
    Likes Received:
    71
    Trophy Points:
    28
    Location:
    Queensland, Australia
    Map
    Thanks for the reply Nelix. I must admit I am sorely tempted by the Ninja ( I am sure you are aware but Kawasaki renamed the Z1000SX to the Ninja 1000SX for 2020) but I would so miss the V4 engine and the VFR overall. I believe Ducati is going to release a V4 Multistrada and I am going to wait to see that, although I expect it will be very expensive. Also my nearest Ducati dealer is 340km away. If only Honda would release a 1000cc VFR with all the bells and whistles. (If I buy another bike they probably will) How does your GF find the seat on long rides? You are lucky to have some very good motorcycle roads near you, I am originally from Skipton in Yorkshire but have been in Oz for 50 years. I’m a little older than you at 61 so I need a little more comfort as well. Sad to see the UK suffering so much from COVID stay well and safe riding.
     
Related Topics

Share This Page