Carbs need to be synchronized

Need some help.
My carbs are out of wack and and I forgot the order of the little screws under the carburetors to get the sync rite!
Anyone have that info?

 

the sequence is very important. start with carb that the idle adjustment screw controls.

if the carbs are mounted you will need a proper set of gauges; if off the bike you do a bench synch.

 

Hey Squirrel...
They on the bike... front 2 are good. Dont know if the next one is LR or RR.
Gage's are mounted yo.

 

match the vacuum on the front 2 cylinders, then match the 2 rears together, then work on the f/r linkage screw to balance fronts to rears. there is some interaction between screw settings so it takes awhile to get it right.

snap the throttle a couple times anytime you move a screw so things settle into place.

 

to.
I been on it since 2pm westcoast time.
How is that Western New York weather?
Riding yet?
I left Westfield in 2016.
Sunshine and blue skies. Mountain roads with no residents!

 

sure but you might slide off to the west any time.

nice and 70 degrees this week, been riding for a month already but my main bike has a split tire valve that i can't fix.

 

But I'm gonna ride the hell out of ACH, GMR, ORTEGA, and 39 before I fall into the Pacific!

 

carbs have finally got synchronized. Played with the needles a bit to work out the flat spot from 5500 to 8000 rpm.
I'm happy!

 

and it was hot!