Random photos

I use zip ties at the ends of mine on the CB-1, as I got tired of losing properly tightened nuts and plates.

 

Those are called chain adjusters. They slide over the rear axle and fit into each end of the swing arms on the RC26's. You use the nuts to pull the axle backward until the proper tension is achieved on the drive chain.

The bolt part sticks out rearward. I saw a photo of those being covered by a silicone cover on an auction site page and thought it'd be a great idea to both protect the metal from corrosion and also provide a more refined look. So I bought some of the little silicone bolt covers (1/4") and will be using them on all my bikes that have these chain adjusters.

The ones in the photo need a good cleaning, which I intend to do. I just wanted to share the concept of the little bolt covers.

 

The Blue Kaplan bike didn't have any when it was delivered. No rubber cushes either. It's maiden voyage was interesting. Traveled about 3 feet...ha ha.

In retrospect it swayed me to change out both front and rear wheels for the right ones with new tires so served a purpose I suppose......

That's it on the left. It still needs a chain guard. I put a set of Joe Nelson rebuilt carbs on her. Freaking things sounds and runs GREAT!

 

Got some dup. keys made today for that Red VF750F I just got a few weeks back. Gonna try my hand at stamping the code on with a stamping kit I just got. My scribing isn't all that great.....lol.....

 

I need to source better Honda replacement keys. Those look decent.

 

As some here know I keep most of my bikes at a storage unit facility. Right now I have several units rented. Most have cylindrical locks but a few use what's called a disc lock, which is closer to a conventional padlock.

The storage unit company automatically charges you for a lock (or locks for units with two doors) and what they charge you is about double for what one can buy them for elsewhere. So I usually buy elsewhere, give the manager back their lock, and get credit back on my cc.

I recently bought a pair of cylindrical locks for my latest 2 door unit that use the same key. Anytime you can reduce the number of keys you are doing good. The problem is after 1 use, one of the locks quit working. I got them on eBay and the seller clearly stated "no returns" so I'm just going to eat this one, even though I could go through the motions, for $20 it's not worth my time.

So I was noodling around and found an eBay auction for TEN cylindrical locks that all use the SAME key! Brand new too. Cost to my door was under $24. They arrived today and I was able to confirm they work. I only used one of them so far, but will return and replace all the others I have right now with these resulting on me only having one key on my key ring.

The downside is -I only have 1 key right now - so God forbid if I lose it - yikes! So I went on the company's website that sells them and ordered 6 more keys - total for that order was only around $20 more so I have that in the works.

Finding this eBay auction was quite a score!

Of course, I will be working my tail off in the off season when it cools off to get down to only 1 storage unit. That would be manageable from a financial aspect. Right now it's ridiculous.

These green locks are the ones I just got......




Here are the existing ones I am replacing and some of the keys. One of the keys on the ring is for a disc lock I have on one of the units - the rest are all cylindrical. You may be able to see I've numbered each key and have a corresponding number magic markered on each unit just above the lock so I know which key to grab.

 

Never seen those. Do they provide any security?

I remember the old disc lock fiasco. I got all of mine replaced with new ones that also could be broken into by a blind monkey child. lol