Finally got around to putting a set of Race Tech springs in my 2000 VFR800. Here's my notes FYI.
You are correct, Badbilly, I left the bolt out for now until the paint cures.
This damage was a bit too big for a simple paint brush touch up....
So, I dropped my beloved VFR on her right side at about 3mph in a constitution zone; foot slipped as I tried to catch her... D'OH!
The 2000 VFR...
Updated photo of my 2000 VFR. Stripped the wheels and added a MRA screen.
It's a Stebel, rebranded as Denali.
Looking at the first photo that's the rear brake reservoir on the right. The compressor is mounted under the tail cowl on the right side.
Here is my list from when I did my 2000 VFR800Fi
Don't forget to replace the o-rings too while you are there. New thermostat is also highly...
Went for a ride today, and yes Outboard John, it does SCARE THE HELL out of cagers. :stung:
I've wanted to put an air horn on my 2000 VFR ever since I got it last year.
I bought a single piece Stiebel, but could not figure out where to...
Fun with "film".
Nikon F5, 70-200 f2.8, Fuji SUPERIA X-TRA 400
In my case; the OEM wiring had no signs of overheat damage, so I just put dielectric grease on everything and plugged it in.
As preventative maintenance I went ahead and installed a Rick's regulator rectifier.
With OEM R/R there was no charging below 3.000 rpm, which...
You got it BAD, superloadedcat, the VFR fever; there is no cure... just have the "ride" it out ;-)...
I'm retired, so I can ride any day I please, doccman. :thumb:
A work in progress...
Separate names with a comma.