Do yourself a favor and buy the Motion Pro snap ring pliers meant for brake (or clutch) master cylinders. Here's the link:...
Beautiful bike! Those white wheels look so clean.
Looks like they made a different upper triple clamp for those police bikes. The clamp has the risers cast into them, so this isn't some...
You'll be fine. The y2k update didn't change engine internals from what I can see and the injectors are the same, so same connectors. If you...
Its mostly fine for now. All the consumables seem to still be available as OEM parts (o-rings, hydraulic system rebuilds, pads, clutches, plugs,...
Could be leaking injectors. Could be out of spec fuel pressure regulator. Could be coolant temp sensor reading low (bike thinks its cold so...
I think I had very similar symptoms to you. Clutch engagement point was very far out on the lever and was hard to modulate. The clutch was also...
The two for the linked brake lines are this part number: 90651-MAT-000, they show up as $2.50 USD each for me. The wire harness clip that goes...
Why in the world would you buy a bike that is known to crack pistons? I don't know about everyone else here, but part of the reason why I bought...
Oh boy. This is the windscreen I've been trying to find for months now and just yesterday I gave up and bought a Givi D200s...
lew, Please note that the ebay one doesn't come with the axle bolt or spacers. I have an extra cbr600f4i axle, but the spacers will be the wrong...
The bike came to me without a Power Commander unit, however I suspect that it had one in the past because the ECU cubby was missing the plastic...
Ha, here's what mine looks like: Rear-fender-drip-small by comradeQuestion posted Aug 28, 2020 at 10:36 AM
Melted rear fender near the upper shock mount.
One of my two 5th gens has a melted fender exactly as you describe. Looks like a plastic stalctite dripping down just behind the rear shock upper...
I recently bought an ABBA stand and really like it. I got all the primo add-ons as well, they call it "Superbike Package 3". This one comes with...
Chris, how has the windscreen worked out for you? I'm contemplating getting one for my 5th gen.
I also used AS3 hoses and didn't have access to a proper cooling system pressure tester. Here's what I did: - I used plain water in the system...
Ok, didn't know they moved it on the 6th gen.
Separate names with a comma.
