The same levers fit the Blackbird, CB1300,CB1100,CB400, Varadero. ASV part numbers for std levers BRC541 and CRC 545 C5 series.
pictures would be very handy.
You do know that the pinlock pins are on a cam so they can be adjusted to snug fit. Easy enough to transfer it over.
Disconnect the battery or enclose bike in a faraday cage.
T31 evo or the newer T32, road 5 , Gt or new gt2. Avon xd storm to name but a few. All more than capable of doing the job.
Easiest thing to do is to look up Honda part numbers for the cross runner and vfr panniers and compare them. As far as I know they are the same.
Depends on where it has been hacked. What you need to do is to get a wiring diagram for it , then sit down and look at it. Ancillaries like...
Much better quality.
Sounds like typical black widow stuff ( formerly sandy bike spares).
I think you have someone on a bit of a power trip. Stickers are mostly put on the plastic covers not on the dial faces . That's how it was done...
Here is the mot guidelines. https://www.gov.uk/guidance/mot-inspection-manual-for-motorcycles
So basically you don’t even need a speedo for an...
I usually stick with Honda OE they are HH rated.
Have used ebc sintered Hh in the past on other bikes
Oh Dear. I would strongly suggest you read the owners manual before going out on the road.
Yes sorry. I made a mistake, its only one screw.
Check the wires are plugged into the front brakelight switch. located on the front brake lever assembly. Easy way to test is to disconnect from...
They are still on sale in the states.
Drop due to resistance in wires and cheap voltmeter. I wouldn't worry about it.
You most certainly will be reducing the electrical load on the RR, which creates more heat , but for tail lights that would amount to only 10W...
I have a motolug, small enough to fit in the boot of my car. Great bit of kit
Try bridging the starter relay to see if that does the job.
Separate names with a comma.