................. The pegs have a spring and ball detent that clicks in at the proper (fully down) position. If those have rusted or jammed up,...
Kenny, Kenny, Bobby, only those ancient VFs had vaccum-operated petcocks. And you're one of our most helpful and wise commentators, so what's up...
Why not try bypassing the relay ?? Very rapid clicking suggests fuel is not getting TO the pump.
Best to BYPASS the relay entirely and throw it into the bin. At the plug going to relay, use a wire to jump the 2 wires there so that voltage is...
If you need a bit of extra assurance, test the float needles for proper sealing and float bowls for leaks by hooking up the fuel line to the tank...
By gawd, man, you own a Honda motorcycle and NO multimeter ???? Trickle charger are like NA beer, don't do the job proppaly. Best chargers are 1...
On that bike you should be able to simply and easily turn the petcock to OFF without fretting about fuel flow when it's not running. Test it by...
You did the proper rebuilds, but i think there's some air trapped within the hydraulic system somewhere. You could try bleeding the slave again...
It's the job of every mechanic entrusted with replacing a tire to check wheel bearings !! The shop that mounted your front tire let you down.
Yo, Mohawk, no vaccum line to petcock on that bike. Low battery voltage and weak charging system won't fire plugs around idle speed.
[ATTACH] You need to check the movement of the central armature shaft by using pliers to pull it up (about 8mm of movement). If that's stuck for...
OEM boots are cheap and readily available. Looking for the electrickal leak ?? Unplug the r/r.
You need to keep the bile idling by holding the throttle while adjusting the screw so that it holds the idle, not the throttle. Turning screw...
You could first try raising the forks (free!) up to 10-12mm.
How many attachment points are remaining ?? It was years ago and my memory is foggy but i remember using a long, threaded bolt to solidly fix the...
What ^ he said, :welcome: Looks alot like you need to clean, de-rust, and coat the fuel tank. Carbs won't stay clean if the tank is shedding...
Answer is NO ! Sparky, you could change sprocket teeth #s to accomplish purposes of trading off higher cruising rpms, wear, noise, with improved...
How many miles on the bike ?? I wouldn't ride it until after the rear wheel was removed and those bearings inspected and/or replaced. It's not...
Everything he said WAS productive and very well-informed, and you sound peevish.
Big jim speaks from experience: " You even have to check the exhaust pipes for obstructions." Here is what i shook out of a VFR muffler that...
Separate names with a comma.
