Hey, buddy, i'm here in Buffalo too with 4 VFRs. In work at 716 Motorsports (corner of Starin and Kenmore), so stop in some time to say hello,...
mUST disagree: filters are fine for 2 oil changes or MORE. OCD is hard to ignore, i know. :distrust:
No, no, no, my friend. Best GD music is always live concerts with improvisation. :love_heart:
Grateful Dead is about the only musik i listen to. That's how weird i am. :congratulatory: [ATTACH]
The FINEST shops will actually have the service manager ride the bike after service to confirm the work was done correctly !! Nothing else would...
The BEST photographers have a university degree in Fine Arts. If you don't know Edward Westin and Ansel Adams, please don't pose as an actual...
It's no upgrade if the tires don't fit proppaly on the rims. Your bike will handle better on premium bias-ply tires that fit the wheels correctly.
Most of us are running on the original cables, so what's wrong with yours ?????? Most wear happens in the throttle grip curve. Sticky cables...
Stainless never needs renovation; find an '86/'87. :distrust: Honda cheaped-out on some later models. Blast nuts in penetrating oil b4 turning...
Test the AC stator output, should be between about 8 volts at idle and 60+ volts at about 8000 rpm.
Raeva me verker !! Leave it alone, and don't fuckwifit !
That's on the low end of what's acceptable.
#3 I don't believe oil ages out. Keep what you have AND CHANGE it at about 2500 miles. OCD be damned !
You gotta pick it up NOW !! gO for it or forever be ridiculed. :witless: If you've never ridden a 4th gen, you don't know what you're missing....
Radial tires on those narrow wheels ???? :frown:
You've kept the bike neat and tidy, so don't sell it now. Get the front end up, and remove the fork caps and springs. Lift the wheel up as far...
People who've never tried it think that hand-filling the filter will cause major spillage problems, but that's NOT CORRECT ! :crushed: It takes...
U need to pull the plug on the starter relay and inspect the bottom for signs of melting or burning, which will reduce or eliminate charging.
You might need to stick the rubber diaphragms in place with some silicone goop b4 putting on the cap.
OK, it borders on OCD, but i usually do it too, although i think it's unnecessary. No real advantage to it. Running a few seconds with no pressure...
Separate names with a comma.
