With so many fantastic artists ageing like the rest of us, and so few truly talented new musicians (or ones that appeal to old farts like me),...
You know I do believe that is the first time I have seen an ironing board used on a motorcycle forum. Nice work.
I believe they had a server meltdown; no doubt Miguel is hard at work trying to restore the system.
No experience with RC51 parts, but the adjuster is most likely the same as you'd find in VTR1000 forks which I have got. Firstly the screw head...
If your chain is loosening in 300 miles then I'd suggest that your eccentric is turning in the swingarm. Check the pinch bolt is tight. I have...
What is the mating side of the gasket Mr Grey? I think I remember one side had writing and the other didn't, and there is only one way to install...
By the way Dude (or should that be His Royal Dudeness...), ever village has its idiot, sunofwolf is ours. He's mostly harmless.
Sounds like you have some maintenance ahead, I would start by checking that the radiator is full (when cold). If you have plenty of juice, then...
I got mine off gently with a wood chisel. Keep the blade as flat to the mating surface as possible and don't gouge the surface. Fill the open...
They certainly look good but I have no experience with them. I bought myself a set of 25mm drop adjustable pegs recently (free international...
That does sound plausible to me; fuel has a nasty habit of gumming up the mechanical parts if left sitting and evaporating for a decent length of...
I get exactly this symptom, sure to be the brake pads rubbing on the disc. My one makes a little moaning sound, which I take to mean it only likes...
The vacuum in the intake is used to lower the regulated fuel pressure; this is so the difference between the injected pressure and the air...
These are what I had on my Suzuki RF900; I did have to do a little filing on them to fit, but they were great....
In my experience a bit of brake drag is normal for the VFR. If you jack the front end off the ground the front wheel should be able to spin for a...
My Japanese market 1997 VTR1000F had a single pink/green wire screwed onto a terminal on the back of the speedo; I pulled that off and, hey...
Looks like a great day for a ride, Jorge. I got out for a calming 300km ride in similar weather on Saturday and killed a lot of insects! Covered...
Well you're going to have to fully disassemble the fork to do the seal, so replacing the bushings is very easy at that point. If you have the...
The fuel pump and injectors don't normally given any bother, but a 14 year old bike that has only covered 4558 miles has been sitting unused a...
I picked up a set of lightly bent VTR forks last year for $200 NZ pesos. Sent from my iPhone using Tapatalk
Separate names with a comma.
