Not to teach you to suck eggs or anything but...Are you sure the check valve is working properly? It is pretty easy for the shim to get caught on...
I did post an intentionally dopey reply before, but now I think I may be onto something. Has the rear wheel eccentric been rotated so the axle is...
The 8.2mm diameter shim is very important as it is the fulcrum on which the shims above are bending. I believe the 0.4 x 11.3mm is just a spacer...
Maybe you can rotate the rear wheel eccentric so the wheel sits higher in the swingarm. That would give you more sidestand angle...and possibly...
Here's a link to the Racetech Suspension Bible. Don't tell the copyright police! Page 75 has the shim thickness:stiffness table....
It does not matter which yellow wires you join as they are all AC. Get a wire size at least the same as the originals (bigger is better but the...
Did you know that a 0.15mm shim has a stiffness just over 3 x that of a 0.10mm shim? That means your 3 x 0.1 x 17mm shms are roughly equivalent to...
Ghastly (sorry...to0 honest?). A naked VFR is a thing of beauty though.
Now you are just pissing off Greta Thunberg mate.
If the alternator and RR are functionally fine, then just cut out the burned section and connector and solder in some new wires with heat-shrink...
That's the only classic Suzuki that I would want, and in the best colours too. They don't make them like that any more. Probably a solid financial...
You can specifically rule out the alternator with a simple test if you have access to a multimeter. When running/revving you should see something...
Yes, dremel through but don't cut the stem! The use your freshly cut race as a driver for the new race.
Maybe the airbox is full of critter bedding or food.
My MT-10 came with a fender eliminator which certainly tidies that back of the (quite ugly) bike a bit. I liked it until my first long and rainy...
Take a look at the older GV instructions I have attached. They have instructions for revalving a stock rebound valve on the VFR750 which probably...
The issue with the thermostat is not that it is especially hard to do but it you do need to take lots of parts off. When you get under the...
Who has been scribbling on the fuel tank! Take their Sharpie away at once! That is very shiny. Everything I buy needs a thorough degrease, water...
Welcome aboard Marekeram. Looks like a 2000 or 2001 RC46.
I think I hate you a little bit more now, Stray. It's just jealousy. The RC8 is a seriously cool bike.
Separate names with a comma.
