I have a brake bleeding pump. It has made things soooo easier. Thank you for the reply!
I think just talking about it here has led me to thing about this a bit more. Thank you for being my sounding board.
The switch on the clutch works. I can push it in a tiny bit more and I can start the bike when not in neutral. It just doesn't get pushed in far...
Can you expand on this? I know what a diode is, not sure how it applies in this case?
When I pull in the clutch, I cannot start my 1998 VFR unless the bike is in neutral. It doesn't quite push the switch in far enough by about 1mm....
I am glad you have your bike back on the road. I have a set of braided stainless steel brake land I need to install. Have not gotten to it yet. My...
Yeah, I realized my error after the fact. The jumpers aren't individual wires, it is groups of wires.
Well, I got no fuel pump prime from soldering the individual pairs for grounds. I cut each pair off the orange connector and then soldered them,...
I did cut off the connector and I soldered each pair together. I see now that was unnecessary to do it that way! :P
Well, since we are here. I found that orange connector under some black electrical tape. Would not have looked there if you hadn't pointed me...
Ah crap. I didn’t notice this was a 6th Gen thread. Also, I have the bike on the center stand. I can still lower the side stand of course....
The bike cranks and fires right up. The FI light flickers and comes on dimly. If I rev the engine to 5k the intensity of the FI decreases...
Bump, reading this because my FI light came on and had to limp the bike home. New battery before the trip. I should have charged it just be sure...
Old thread, but it helped me this morning at 3am when I couldn't get my clutch bled after replacing the slave and rebuilding the master cylinder....
This is good to hear. I just bought the 11 line set for my 98. This topic is timely for me. I am rebuilding the both the clutch and front...
Can no longer get the stock windscreen, fuel tanks, upper cowl set, right side lower fairing, etc. If looking for a 5th gen, it would be worth...
I did this on my 5th gen and I like the results for low speed riding in traffic it definitely helps. ;)
Believe me. I would much rather we go to the metric system and stop using the cubic bushel system. ;)
I am very fond of that color. Welcome to the forums!
Welcome! I really like that color. Wish we had that over in the USA.
Separate names with a comma.
