thanks guys always had tapered in all my bikes, so was kind of surprised to see the VFR OEM's were balls guess i'll just get a kit with the...
been lurking a bit as 10K miles on, my 90' still runs like a champ, till now at least.... head bearings need replacement. the originals are...
Hi guys i am just back from press day at the EICMA show and... our lovely VFR800 is back, easy to see the good old frame and motor behind the new...
No, dont have a turbo-guzzi, only a stock 1980 LeMans III 850. regretfully its now in boxes awaiting restoration, just too busy fettling my...
found a 1999 CB500T (european model) R/R at a breaker, it plugged right in to the harness, 2K miles, no problems so far. Heard of people using R/R...
Gasket is there mostly to prevent the flying goo getting outside the cover. nothing that cant be replaced with a layer of black silicon sealer. TG
mine's like that too, always bellow 1/4 save for heavy stop and go. TG
pull on the chain on the back side of the rear sprocket, at the 3 o'clock area, if chain lifts off the sprocket so you can see half of the tooth...
nice find! that is the monorack (top case only) the wingrack instructions are here GIVI.CA - Mounting INSTRUCTIONS TG
looks like you'll need only four shorty 8mm bolt to mount the the bottom spars to the rear subframe + 1 longer 8mm to mount to the left rear...
my take on this is: - the current location the frame actually HEATS the R/R rather than cooling/or heat sinking it - in the current location a...
try posting a picture of the stuff when you get it and ill try to help TG
OK, clearer now. all i have to say is that i've got no idea why givi went backwards like that with the mounting hardware. my earlier kit...
Go by fit not by brand and definitely don't buy without trying it in a shop. even if you later buy the same model online, as all the high end...
thanks for the pics might adopt the solution if R/R ends up frying itself in its new position, just outside the right seat panel (with big heat...
cool. is it fixed or moves with the steering? maybe a pic form further away? Cheers TG
6'4", 185, fit just fine. only problems are: my shins sometimes lightly touch the the rear of the fairing, not a big issue. more difficult to...
hei cruisin' see if its any help the three cast parts are always the same, the bike specific hardware is: a pretty straight sqaurish...
Kenwood OK, so ebay parts for the shift mod arrived quicker than expected, it was an easier job than I have planned (happens....), two hours...
got the older styled winrack (previously monorack?) mounted on my 1990 Gen3, if it'll help you I can take pics the bike specific HW is pretty...
Separate names with a comma.
