The shock linkage mounts on a 90-93 swingarm are different from a 94-97. If I saw a picture I could tell you which one it was. I'd be interested...
On a carbureted machine running no muffler should make it go stronger in some parts of the rev range but it would also make it run leaner which is...
I paid $100 for used stainless TBR slip on in great shape. Wouldn't go more than $150 for the carbon seeing as the Delkevics are around $200...
Speedo runs off the front sprocket on my '91. Kinda crappy plastic socket thing that fits over the sprocket bolt.
When you shift gears without the motor running sometimes the gears don't engage like they should. I wasn't thinking it was a "false neutral, just...
It made that sound when it was hot, but not when it was cold? Are you sure it was all the way in neutral? I've heard a sound very similar to...
I meant the charging system, personally I would go ahead and give the whole electrical system an inspection/cleaning, who knows what could be...
If it's got good compression & spark (I have my doubts about the spark, you have to quantify how strong it is outside of a visual inspection) and...
You didn't happen to notice a puddle of fluid did you? Either way the clutch as in the pressure plates and springs should be fine, you probably...
Before you go chasing your tail I would would eliminate anything "untraceable" first by checking & cleaning all the connections in the system with...
NAPA still has a sealed battery for the 750 for $69, two years so far so good, I trust NAPA products more than any of the the other retail chain...
The Hotcams kit fits perfect & at less than $80 shipped I think it's a bargain considering you'll never have to buy another shim ever again . I...
Sounds like a classic case for good old fashioned basic tune up... Replace the plugs, clean or replace the air filter, take the bowls off the...
I bought a set of all 4 off ebay from California for $40 and they were very nice but in my haste I clicked on the wrong ones (I think for a CBR...
I thought you were kidding about that... I did that ONCE with an old Wet Bike on a test drive, didn't put the boot all the way on & it popped off...
Sometimes plugs don't have to look bad to be bad, I replace mine every winter regardless of what they look like. What scares me is when one...
Semantics... He said he warmed it up to "operating temperature"... that's the point just before or right after the radiator fan cycles, at least...
Yep, issue resolved. With no clearance you have to put shims in that will give you enough clearance to measure. From there its easy to determine...
Finally got the Hotcams kit. Installed 1.5mm+/- shims and found that they were all off by .3mm+/-, which is just enough to give you no clearance...
Impact aside, I've always replaced mine after the interior gets worn out and it doesn't fit like it should.
Separate names with a comma.