With small nicks you should be ok, to really match well you need to use the correct basecoat. I do believe the companies that sell the correct...
I've used em but never been happy with the results, for real small nicks perhaps ok. If you can find a 1/2 ounce bottle of brush on it might be...
Quote: It was pushing 12 volts, however the cca was very low (exact number escapes me at the moment). "pushing" 12 volts is NOT a fully charged...
Quote: same on the back as it is the fronts all round seems to be same part number ? NO, not necessarily, depends upon year of 6th gen, some...
Fork oil, i change mine as part of annual winter maintenance. (using 5000-7500 miles), along with brake fluid and clutch fluid change. It is...
Bertye: Thanks a lot, that helps. I do have the 2002-2007 service manual but was not sure which bank was being shown in the pics showing the vetc....
I'm planning on a check of non-vtec valve clearances. Trouble is i don't know how to tell which are vtec vs non-vtec. Can someone tell me cylinder...
Per Jack from Roadster Cycle "Also the black wire comes from the ignition not to the ignition, it’s a R/R excitation wire that the Mosfet does not...
Mello Dude's RR plate works really well (previous post pict). Just installed a Shindengen Fa20AA using that plate.
Re: above post....solved my problem....a real DUH moment. After studying the manual, studying all my wiring etc, i finally realized that the...
Installed Roadster cycle Shindengen FA20aa RR in my 2007 VFR today....now won't start!!!!!! Background, I've done 2 other such conversions on my...
Which RR is this the dimenisons for?
With my previous gen 5 VFRs and other bikes i upgraded to a Mosfet/Shindengen rectifier. On this 2007 6th gen i see that the current location of...
Nice, I've had 2 5th gen, and finally last year picked up the 07 anniversary edition (very low miles), love the looks of that bike. First two...
I change fork fluids annually and am always surprised just how dirty it is. What i like to do is to flush the forks with a light fork oil, i...
Anyone consider just checking/adjusting the non-vtec valve clearances? I've done the previous gen non-vtec vfr many times and its pretty easy....
So? I really don't expect a wheel or tire to be wobbling around that much where it would present any problem, my stock chainguard (99vfr) is...
Any reliable shop should have given you a sheet that showed you the measured clearance of each valve that they checked. I would never revisit a...
I have the newer Mosfet type on my gen 5 VFR and get 14.3 at both idle and advanced rpms. Don't rush to buy a replacement rectifier until you...
Just blew up the motor in my 1999 VFR (19,000 miles). Wondering if a 2000 or 2001 motor would work if i use the 99 throttle bodies? Studying the...
Separate names with a comma.
