[ATTACH] So I think I found my issue. The last time I mounted the fuel tank I routed the fuel line incorrectly and crimped it between the tank...
I think I'm using the wrong term. When i close the throttle quickly, ... then re-open its as if i'm out of gas.
86 VFR750F with a dyno jet kit main #118s with the needle on the third clip. During a WOT and steady cruise at hi rpm (over 5 grand lets say) I...
Its the 16034-MF2-711 JOINT SET, FUEL. #9 on the partszila fisch. there is two of them. You'll most likely need orings
Thanks for the link.
I agree. It will get wings soon.
[ATTACH] So here's my 86 almost done. Deciding on which emblems to put on then it will be complete. Re-jetted carbs, - one, up two on the gearing...
If the muffler is built anything like the second gen pipe you can (this is what I did) cut 11/4 inch off the end of the barrel with a die grinder....
SO Iv'e decided to tear into a second set of stock pipes for my 2nd gen VFR750 to make them louder!in trying to drill out the spot welds holding...
[ATTACH] Here is the cluster
87 700 parts bike, Im using the brakes, wheels, some motor parts, suspension front and rear. The plastics need alot of work! What do you need?
I have been slowly improving the 86 VFR750F I bought a while back. It was crap, barely ran, carbs were shot, had to ride with the choke on! Bought...
[ATTACH][ATTACH] Here you go! Front next weekend!
Just painted mine. Found a post here with pics 2nd gen painting with tire on the rim, worked great. Degrease the wheel, wet sand as needed, break...
Had to buy a complete parts bike to score mine!
Im' putting one on the ZRX soon. I'm told the light is great and the beam spreads wide. If it works out I'll put another on the Gen1
86 VFR750 Anybody got suggestions for adjusting pilot screws with the carbs on the motor(altitude), t. Or just a long skinny flat head! Plus while...
1986 VFR750 Backstory; bought the bike with electrical problem/fixed it. Started the bike and had a fuel leak/fixed it. When I fixed the fuel leak...
So I'm just getting it running to evaluate what needs to be done. But installed new oring on fuel tee, put the carb back on and #1 lubed the boots...
Just picked up a 1986 VFR750 for cheap. Thought I'd screw with it for awhile, let my kids ride it! As I said in another post part of teh wiring...
Separate names with a comma.
