The reason I did that is because I wasn't getting much oil flow out of the rear cylinder passage. I removed the banjo bolt and there wasn't any...
I am going to test the voltage when I am twisting the throttle and see if it drops before the stall.
The bike is a 1983 VF750f
That is the price on CMSL. I haven't checked anywhere else but will. The price included shipping.
With shipping it will cost me about $130 CDN for 16.
Close to 14 volts when running.
That is a great idea - thanks. A found a video from a guy with a Magna and he had that problem.
43,000 I am thinking about hauling the engine out again and rebuilding the top end. I pulled the engine out once before to add a spring one of...
I was still having trouble with engine noise (the noise is still there and I am at my wits end with this bike) and decided to remove and clean the...
I would certainly like to try a manual tensioner if available!
I have discovered that the blade on my cam chain tensioner is shot and must be replaced and I have a good used replacement. My next question is...
Thanks for the link. Is there any way to reuse what I have?
Interesting. Do you suggest that I buy a new used tensioner? What wear should I look for on the tensioner unit?
I just noticed something interesting. I inspected the cam chain tension blade from my parts bike and it appears that the ones in my bike are worn...
I found this information at this fellows website. Improper cam chain tension. Various redesigned cam chain tensioners have been developed. My...
I have a 1983 VF750f and there is excessive ticking in the top end very similar to this Magna (see links below). In this case the fellow...
I discovered later today that the cylinders do register on the Carbtune but not until the throttle is twisted. One cylinder is reving normally...
This looks great - thanks. I have tried sockets, swivel sockets, screwdriver bits, right angle screw drivers, small screw drivers and a few other...
Hello again. It is finally warm enough to run my bike in Alberta! The bike would not idle without the choke but managed to adjust the idle...
I just posted a photo of the original tank.
Separate names with a comma.